In this project we are going to build a safety and security system for an industry or factory.
It will notify you when unknown devices connect to your WiFi, monitor internet speed, and alert you when your Internet connection drops.
Arduino based wireless temperature and humidity sensor, can run for 1 year on single 14505 battery, and data transmission is encrypted.
Building an open source home security system with Raspberry PI Zero W
If a flame is detected, this device will immediately send current location.
Wio Terminal with a CO2 sensor to measure the indoor air quality and remind to ventilate the room.
A new way to save lives by neutralizing the attacker before he can act.
Introduction Hey techies, welcome back to Techatronic. We are sure that you are aware of the term automation. This topic is in trend nowaday
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
IoT Lockbox allows you to securely store packages, mail, lab samples, etc. It can be accessed by scanning its QR code with the mobile app.
Terminator's Skynet comes alive in the form of a badge.
Unlock your deadbolt remotely through WiFi using Netduino.
This traffic light controller will be used to control the flow of traffic. These can be applied at high traffic areas to avoid traffic block
PIR-based motion detector is used to sense movement. They are commonly used in burglar alarms and automatically-activated lightning systems.
It's a simple digital outing system which uses RFID technology to register the details of the student moving across the college campus gate.
I wanted a distraction-free way to give my 7 year old a way of quickly contacting me in an emergency, so I built a 2 button cell phone.
A low-cost GSM GPS tracker being built on Collaborizm.
A cute little companion bot for media excursions! With a smart, consent-based camera, high-quality microphone, and cute wiggly ears.
Design and build a system to monitor the status of a laboratory using the WizFi360-EVB-Pico Board.
See who just entered your room remotely with this Raspberry Pi Camera-powered device.
A road signal for directing vehicular traffic by means of colored lights, typically red for stop, green for go, and yellow for wait.
When there is motion the sensor detects it resulting in an LED light flashing and a buzzer making noise
This alarm will turn on a buzzer and the bulb when the capacitance sensor senses something. And show you how to make the sensor yourself!
IoT intruder alarm system on an Intel® Arduino 101 with DFRobot LCD Keypad Shield, connected to the IoT using the IoT JumpWay MQTT Library.
