It is 5.1 channel amplifier board consisting of dedicated high fidelity IC for subwoofer and speakers. Let's build one as party boom box
If you want to learn how to produce your own small electronics gadget then this Hackster post will give you some tips
Exploring DIY stencil-making at our Fab Lab led me to the perfect laser-cut solution using the Xtool F1 Ultra.
Reimagine the classic Snake game with Arduino Nano and SSD130 OLED! Fun coding project meets nostalgic gameplay.
A single Arduino board is used to connect different loads at a time for different purposes.
Have you wondered how computers compute things at the hardware level? I was curious so I made a binary calculator using only transistors.
You'll learn how to create a board to fix the problem of Jumper wires loose on Arduino and how to tighten jumper wires.
How to program a through-hole OR surface-mount ATtiny85 chip as a low-cost, low-power Arduino.
In this DIY guide, I will show you how to make your own security check system based on Arduino!
You'll learn how to making a standalone arduino.
Display weather information and activate RGB color patterns via this shield, including built-in BMP280 and photoresistor, designed by me.
Via Nano 33 IoT, use RFID tags as bookmarks to record your ratings. Then, inspect them on Qubitro to grasp and review chapters deliberately.
2-layer LOW SPEED Lowest cost breakout board for FMC LPC Mezzanine FPGA connectors.
In general, my project is a kind of kinetic art. It has a strong audio amplifier 5W and Arduino board, and both are made from scratch.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
Porting Arduboy to the ATMega4809 and making it run on a Arduino Nano Every.
Display comics release lists of this, next, and previous weeks via Nano 33 IoT and this amazing 🕷 PCB playing Spider-Man theme song :)
I made this really amazing PCB for INTEL 8051 microcontroller in the form factor of an Arduino UNO. See how to build your own one.
Check how to make a simple temperature and humidity sensor to monitor a room and send data to Home Assistant.
The Shield is an adapter allowing Arduino Nano form factor microcontrollers to be plugged into Feather form factor sockets.
"Budget STM32F4 flight controller: MPU6050, BMP280. Simple, reliable for DIY drones. Perfect for learning. "
A little jewel that you could use for anything: 100% open-source build on KiCAD 5 and FreeCAD 0.18.
It is a PCB in the shape of a Christmas Tree with 12 charlie-plexed LEDs reverse mounted to shine through the board.
This project will cover the development of a printed circuit board intended to drive a reflow oven.
