Using this programmer any Serial communicating device can be programmed. I made this for my minimal Arduino nano board (Atmega328)
Today in this blog we will attempt to design and make our own PCB business card or say visiting card.
Increase RepRap capabilities beyond fused filament fabrication to produce different parts like circuit boards, plastic parts, and ceramics.
I have developed this platform for people with special needs. It can be used by people with mobility impairments or mental disabilities
Why wear a boring paper card to a conference when you can bring a cool and hackable one based on an ATtiny85?
It is the new series on PIC microcontroller in which we will learn basic PIC programming and hardware implementation to advance level.
I've made a BLDC motor controller board based on STM32. That board will used on a hydrogen powered electric car prototype.
This project demonstrates how you can develop various GPS/ GPRS and SMS capability developments via the SIM800 integrated circuit.
This project we have made a Talking / Voice Notification and Warning System. At least two sensors can be used in this project.
The project concerns a simple 433MHz radio frequency receiver module designed using KiCAD and fabricated through PCBWay.
It is an isolated synchronous buck converter that can generate multiple inverting outputs helpful in electronics applications.
I created this PCB badge after having a brain surgery to remember it and celebrate that everything went fine!
In this tutorial, we will be going over how you can program a button to distinguish a long press versus a short press using a Wia Dot One.
Conexio Stratus is a new nRF9160 based cellular development kit from Conexio Technologies in a tiny feather-like form factor.
Designed Voltage Regulator PCB board for my own use and save money.
How to make your own LED Pumpkin using Arduino and some simple electronic components for this Halloween?
Galvanically-Isolated Modbus, 1-Wire, CAN | LAN | HDMI | LCD | USB | RTC | RELAY | QT Application for small Displays | Open Source
The project is about the design of a board that utilizes the STM32F4 microcontroller chip
This project will design a car battery monitoring voltmeter that will help drivers monitor the conditions of their car batteries.
Fully Hackable and Open Linux SBC for Makers. Available in multiple form factors.
This project is to build NE555 IC LED Chaser Board, incorporating the 555 timer IC and the CD4017 IC.
This project is about a light-sensitive alarm that is good for alerting the user when light is on in the morning.
If you have a reason not to using booster module, then here is it.
Modernize your DualShock4 with a USB-C connector. No disassembly or soldering required!
