The second project draws to a close.
I wanted to create a device that could spin spools of thread when I pressed a button so I could just cut the thread and continue sewing.
346 Quintillion (346 x 10^18) Years! Even the universe (most probably) won't see the full rotation of the last gear!
A rover that runs on wheels using Raspberry Pi 3 and is controlled remotely through hand gestures! (With the use of Myoband.)
Hey guy, welcome back to Techatronic, there is many applications where we need to DC motor direction control for example in washing machine
Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...
Simple design of a PCB that offers OR'ing capability between two power supply options.
Use geared "N20" motors from ebay/aliexpress to power LEGO vehicles/projects. This project uses a few 3D printed parts.
The objective of this project is to create a hovercraft and a remote control from scratch.
This is a demonstration how a Netduino 3 board, four Adafruit Motor Shields, and nanoFramework can control 16 fischertechnik motors at once.
Curtains are such a hassle to move. Here is an easy way to save yourself all that energy.
This project walks through how to create a software design for the Kria KD240 Drives Kit in Vitis Unified IDE 2023.2
Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?
E-skateboard powered with Siemens SDI TAPAS, a 48 V GaN based three phase community inverter board with onboard filters.
A novel use of a stepper motors in creating music.
This project is for a three omni-wheel robot using two TB6612FNG drivers.
The idea is to send High/Low, or 0/1, to the motor driver to control your car with the accelerometer shield from 1Sheeld.
What you need to control the motors of your robot? H-Bridge is the magic word!
Model train controlled through the rails? - Lame! Why not make it autonomous with an onboard microcontroller? That's just what we did!
A 2-in-1 CNC machine with a rotary tool and a laser module. Project is Moved to arnabkumardas.com/diy-project/cnc-router-laser-engraver/
Using I2C to control a servo from MaaXBoard is simple!
The servo motor will spin 90 degrees.
I will show you how to use the free Wokwi Arduino simulator and list the features of the Wokwi Simulator. Let's get started😎
Made a Motor Driver Controller board powered by an Atmega328PU and an HC01 Module for Connectivity.
