DC motor driver using power MOSFETs [30A, Half-Bridge].
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Stepper-driven, MIDI-controlled tonewheel robot made with laser-cut sheet metal tonewheels and custom pickups. Powered by an Arduino Due.
A 10 meter long installation, consisting of 30 moving triangles with controllable RGB LEDs in them, acting as a moving display.
Home Automation Using Arduino and Bluetooth Module
In this project we will see how to make an ESP32 Mecanum Wheels Robot which is capable of moving in any direction.
Arduino Workshop-Simple Motor Control This tutorial we are going to Arduino Simple Motor Control, in one
A rover-robot that detects your face and follows you.
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
A variation of the keyboard controlled model train, controlled by a PS/2 keyboard.
Use an EtherCAT master to communicate with 2 EtherCAT Arduino Shield by Esmacat(EASE) on Arduino to control motors using Touch shield input.
This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.
This project walks through the basics of controlling a BLDC motor using the AMD Kria™ KD240 Drives Starter kit with motor accessory pack.
A tiny homemade radio telescope I built which can take pictures IN RADIO.
Create your very own full-size Star Wars BB-8 self-balancing robot using these instructions.
Easy to build example of a brushless DC motor. Switching of the electromagnet is governed by a hall effect sensor.
* is an art installation, an armillary sphere apparatus rotating an apple in 360 degrees and four cameras are monitoring the apple.
This systme can change the speed of a DC motor and monitor the real-time rotating speed of the motor by an upper computer.
Summary of the project I was needing to run a 6 amp x 12v fan motor over a time during the day for a solar power system in a ship container.
I made this for homeroom as a kind of motivational card and as a way for students to get prizes.
The PTHAT has been designed primarily to fit and work with the Raspberry Pi, it can also be used with other MCUs such as the Arduino boards.
Problem: You want to attach your Raspberry Pi to a robot and So you have to need Powering a Raspberry Pi with Batteries
This is a quick project on making a low-budget train control throttle using a servo motor. Ideal for beginners.
