Come and design a traffic light system on your own!!
Got few LEDs laying around? Why not use them to make a 4x4x4 LED cube with the help of Arduino?
Introduction Hey guys, hope you
My first PCB design project was to create a wearable, soldering practice project in the form of Digilent's loveable Turbo.
SOFTPWM : DMA+GPIO, not interrupt based, individually controlled, did you ran out of PWM pins?
A "Tree of Light" with 9 plexiglass discs each adorned with LEDs arranged in a flower shape.
A RGB LED whose color changes based on the temperature.
A small logic probe for CMOS and TTL circuits. Measures 5 states, detects pulses and can play different tones for the different states.
A motion detection lamp. It switches on and off when there's motion.
An 8x8 LED Display driven by a MAX7219 and a Spark Core. Display content updated from an Azure Web Site using the SparkIODotNet Library.
Magic wand to paint with color light based on temperature.
Hello guys, In this tutorial, We'r going to show you how to make a DIY Led Cylinder at home.
Hey! I have made a RGB Goggles using WS2812B LEDs and Arduino Nano. The Goggles have many animations they can be controlled using an app.
Bring a building-sized digital clock to life using 129,600 independent RGB LEDs controlled by 72 BeagleBone Greens.
An IoT lamp with gesture seonsor, temperature sensor, and multiple light effects.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Imagine a plague doctor, but like in a cyberpunk post-apocalyptic future. It combines a plague doctor mask and a gas mask, and lights up!
A micro game with LED matrix where the pixels used for the entire game are about those of a single sprite of the original invader.
Classic Tetris running on a custom WS2812 2020 LED-based matrix powered by RP2040
Yes, it's overkill, but if walking up motion-activated light-up stairs is wrong, well then I don't want to be right.
Using 60 LED's facing a suitable wall, the time is projected in colour.
In today’s greenhouses, many parameter measurements are required to monitor and control for the good quality and productivity of plants.
The SmartMatrix Shield is the best way to connect a Teensy 3.1 to multiplexed RGB LED panels - play GIFs and FastLED patterns
Create your own little disco!
