Made an EREN YEAGER-themed PCB Art that has two LEDs connected with a 555 timer IC in BiStable Configuration.
This sensor detects the water level and the module beeps when it reaches the specified range.
VisionAid is a smart device that provides real-time audio descriptions of the surrounding environment, helping visually impaired users navig
Use the Ada programming language to do simple Zynq development (PS/PL) on the Zedboard.
I designed and built a fully transparent Arduino UNO‑compatible board on a flexible PCB; no copper pours, no hidden layers.
Segbot that can be steered by specific notes on the piano and performs a dancing routine once it recognizes three distinct notes.
Make an Arduino controlled light array that alternatively dims and lights LED diodes with a compensated voltage giving a cool visual display
Install the objects on the door, and when someone comes, the lights inside will light up to remind the people inside to open the door.
The system activates the motor via relay and drives the LED strip with rainbow effects once human presence is detected.
This kitchen timer product provides convenient operation for food cooks. Users can easily set the timer, visually check and understand the t
This project how to build a smart digital dimmer using GreenPAK™ SLG46620V
Lava-lamp effect for 8x8 matrix.
Smart emergency light used ( PIR, light dependent resistors (LDR), Photoresistor, BC547B transistor, s8050 transistor, MT3608)
Golf greens often require a lot of labor in order to maintain them. This project plans to make that job easier.
The light intensity can be changed and controlled according to the needs. By using bolt Wi-Fi module we can control the intensity of light.
Unlock the challenge! Guess the changing password by pressing the right switch. Test your skills and stay one step ahead!
Traffic lights using Arduino and leds.
In this project, I am going to enlighten you on how to design the Energy saving bulb schematic and convert it to a 3D view for fabrication.
When we insert the ID card into the device, it retrieves the person's information.
A lamp created to challenge the user's senses and thoughts of normal. This lamp turns on when unplugged and turns off when plugged in.
Set up the NUCODE NU40DK nRF52840 dev board in Arduino IDE and run your first Blink sketch — no extra libraries needed, USB serial works out
Aren't you bored of being late and missing your bus every time? With this display you can view the upcoming busses and not have to hurry.
Today I done blinking of led in STM32F401CE
Will guide you to build a simple web control LED unit.
