A short guide on how to get the the BerryIMU working with Raspberry Pi Pico, either using I2C or SPI.
This tutorial would take you through the steps required to build mbed firmware for the itracker sensor modules using Mbed online compiler.
Scratch Cat want to catch Xmas gift. So you control giftbox for Scratch Cat!! This project use M5Stack and Scratch 1.4 with M5Scratch.
It's out of this world - 10 Dof, LiPo safety & up to 2A with an ESP32-S3. Lets build some rockets or whatever your creativity can dream of.
Multimode Arduino Matrix Clock, Word Clock, Thermometer, and Random Word Generator controlled by various motions.
Creating a motion-sensing application to recognize human activities using machine learning on Hexabitz modules.
Gesture recognition using RPI Pico and Edge Impulse machine learning, maps gestures to shortcuts
An open, modular wearable hardware platform for researchers and makers, building flexible sensing and edge AI.
A smooth ride for all; detect potholes on the move and report the according GPS coordinates for future reference and repair.
This series of articles explains how to use the Tactigonβs integrated sensors and communication interfaces to create a gesture controller.
Invensense MPU6050 is a sensor with inbuilt Accelerometer and Gyroscope sensor along with motion and fall detection capabilities.
Build a tiny IMU data fusion logger by connecting Hexabitz IMU module to Hexabitz Micro SD card module.
Hold-the-drop project shows the robustness and reliability of the connection between modules of Hexabitz.
Adding AI and an accelerometer to a ball to classify its movement
We developed a glove with an inertial measurement unit (IMU) sensor attached to control a wheeled robot using MSP 430 and myRIO board.
Fully open-source Inertial Measurement Unit (IMU) development board built around the STM32F405 processor, the ICM42688-P IMU sensor.
Raspberry pi interface with Hexabitz modules which make them useful for new brand projects
A basic 2D Physics Engine with WatchX using IMU data.
The BerryIMUv3 makes it easy to detect double taps, which can be used to control the GPIO of an a Raspberry Pi.
This project helps you measure the angle of a surface with respect to earth's gravitational field using Hexabitz modules.
See how the C0-microSD's uncertainty tracking can be used to better estimate 3D positions from acceleration data.
The Tracer is an open-source ESP32-based Inertial Measurement Unit tracker that allows you to track the motion and orientation of objects.
Replacing old analog tilt with modern digital 6 axis imu
Fun robot dog that responds to both different pitch frequencies and a game controller!
