Add Z-Wave enabled devices to your home automation system with a Raspberry Pi and a USB Z-Wave controller.
The project acts as an automatic door opener for an establishment then counts up or down the customers that went in and went out.
Made a PCB Necklace by using an Attiny13 and a Diamond Shaped PCB
I often have trouble focusing on what I should do. This device will help me!
When someone enters your room and switches on the light you'll an alert message via SMS on your phone.
Rainfall Measured Using Arduino
Add a $2 wifi card to a Pi Zero. This is based on the hackaday RPi Wifi project. Turn it into a Windows Backup Server. (In progress)
Wearing shirts and shorts, but it's 40 degrees outside? Wearing a hoodie and sweats, but it's 103? Never again with a TEMPorary Solution.
This very simple arduino control transistor switch for controlling cooling fan.
In this I show you how to control LEDs using Blynk app In IoT platform.
DIY Home Monitoring & Intruder Alert system
Reed switch is used in many of the real-life applications such as magnetic door switch, laptops, smartphones etc.
On chips with an integrated USB Serial/JTAG Controller, it is possible to use the part of this controller that implements a serial port (CDC
Surfing the internet but failed, big clocks take too much space, small ones are hard to check the time. Well, I decide to make my own clock.
We replace the clunky, hard-to-use, aging controller for our home's in-ground sprinkler system and integrate it with our home automation.
With the help of Google assistant and Bolt wifi module the Bell which rings via voice
A simple project around converting a regular bathroom scale to IoT one. A Wemos module is used with the scale along with HX711.
Learn the basics of using BLE with Arduino using this easy example code step by step.
Look inside a RISC-V processor and see how it ticks
Frustrated with the toilet seat being left up or dirty by the person before you? Moms/wives/girlfriends, this automated solution is for you!
This module is a simple PoE module using W5500 from WIZnet.
Use amazon echo to start your car, and keep it warm and toasty on winter morning.
Weather station using StackyFi that collects temperature, humidity, and pressure data and displays it on a web interface
In this project we've built IoT based smart and secure lock which have 3 layers of access. RFID + PIN/password + OTP(one time password).