Retrofitting and downsizing a 2"x3" rain collector to fit a 2"x2" gutter system for sustainable aquaponics.
The DIY solution that provides safety in the event of a power outage.
A "for" cycle blocks the code. This short article is about how to implement non-blocking "for" and manage more processes at the same time.
It was not that easy...
Love Skittles? Maybe a little TOO much? This contactless smart controller will help you portion control... OR SUFFER! =)
Records weight online via MQTT. Also displays time, date, inside temp, outside temp data received from a second existing controller.
We will be programming an interface for the switches we built.
This project was to setup a sensor suite attached to some "industrial" equipment, to monitor their status & simulate preventive maintenance
Reed switch is a magnetic type, if the switch enters a magnetic field, the contact feathers will closed, and it provides electrical signals.
This is a very interesting yet simple project for making Waterpump control the water level smartly.
An Alexa activated alarm clock that when it goes off, LEDs with strobe until the alarm is turned off.
Using WIFI, the camera module streams to a local server. A second device then fetches these frames and projects them to a display.
Remotely turn GPIO on/off, take photos with the camera, and start up your PC through the familiar Discord interface!
This is the 2nd prototype iteration for a for development of an ultra low power home DC electrical system using solar photovoltaics
In this tutorial, I am going to show you guys how to design this "Transformers PCB Badge" and how to solder the components to it.
Will guide you to interface the DHT11 with Node-Red via LattePanda 3 Delta.
Smartly control 4 lights or home appliances using ESP32 with both web and manual control options — brought to you by YaranaIoT Guru
DIY your project with our AiPi-Eye-S1 now!
This project demonstrates how to build a non-contact infrared thermometer using an Arduino Uno.
As we are living in a pandemic, developing products with a touchless function will undoubtedly assist to limit contact.
This is a shield compatible with Arduino, consist on 20 digital outputs ready to use ( Diodes Led )
Automatically text your parents that you're out of the house when your wallet isn't in it's designated dock!
we’ll build a simple project with a PIR motion sensor. Whenever motion is detected we’ll light up an LED.
Learn how to get temperature and humidity readings with the DHT22 and Arduino Nano
