Build a fail-safe OTA update system for embedded Linux with A/B firmware partitions, automatic rollback, and reliable recovery.
Upgrade a Chouchin-CH899 with railway-style hand movement, automatic DST, dual NTP servers, second-hand battery saving and web settings.
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
How to compile your SIM7600SA-H application with OpenLinux and update the firmware remotely using the Firmware Over-the-Air feature.
Burning the firmware file of Wio Link on D1 mini (based on ESP-8266EX)
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
Learn how to build an environmental monitor, put it out in the field, and then update its firmware from the comfort of your desk.
Learn how to remotely open or close a valve, and measure the liquid flow state over cellular.
How to Flash Factory Firmware in Seed Studio XIAO ESP32C3
Pycom software and firmware over the air update manager using Resin. Pycom devices can connect to a resin gateway and update, wirelessly.
Scan barcode to identify medicine and play audio file with medicine name, dosage, expiration date and instructions.
Smart headgear that covers up your safety on road with tinyML-based crash detection and SOS alert over LTE-M
How to Flash Micropython Firmware in Seed Studio XIAO ESP32C3 using esptool
How to Flash AT Command Firmware in A9G(GSM/GPRS+GPS/BDS) Board
ESP32 Web flasher which allows to set any string variable such as wifi name and password. Including a wizard which can be customised.
I recently got an FS2011 Geiger counter, which is actually not too bad, but has an awful firmware. So I decided to write my own.
Kayak paddle controller tracks paddle position in space using an IMU. This will be used for paddle assist features!
This is my hands free, on-oar, remote control for the DIY electric kayak.
The most powerful NES emulator for Arduino! Designed for the Giga R1 WiFi and Giga Display Shield.
Experiments with the STM32 microcontroller with 5 switch controls to activate 3 LEDs in active low and in-built LCDs by RT-Spark
Constructing a Basic User Interface via RT-Thread RT-Spark's built-in LCD.
