An intelligent system that senses, learns, understands, and responds to its environment in real time.
Autonomous multi-sensor environmental analysis payload integrated with ROS2 sensor fusion and custom PCB power distribution for rover.
Autonomous AI-powered smart irrigation system on the nRF54LM20 for water resource optimization in agricultural industry.
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
This circuit measure the water level of a tank and wirelessly send it to a receiver where it is displayed using a LCD display and LEDs.
Radio emissions from sky sources like Sun and Jupiter can be received and converted to digital domain for processing.
Build your own high-quality water sensor to monitor your pool or spa.
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Electronic greenhouse controlled real-time, because the environmental conditions change continuously, so we need an efficient monitoring.
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Temperature logger using ESP8266
A simple build-your-own environment monitor for your home. This project uses Particle Photon, sensors from Adafruit, and a 3D-printed case.
Monitor the temperature, humidity, pressure, air quality, dust particle concentration online & even detect fire using LinkIt ONE & sensors.
Preheat the house; adjust from anywhere. Thermostat that adjusts to your life
Environment Pollution Monitoring system using Internet of Things-IoT United International University.
Solar-Powered Ribbit Pro, Self-sustaining, Cellular IoT capability, Adafruit Feather compatible
This is a project that will measure the temperature of the environment, display it on a 4 digit display, and update it every 4 seconds.
Air Quality Monitoring that uses the Intel Edison Compute Module, Amazon AWS, Visualization through Kibana, and drones!
Not only this project has all the Smart Home features but it also includes MYO gesture control, allowing control of lights with your arm.
A low-cost approach to perform digital street condition surveys continuously by integrating street imagery with ride quality data.
