I built LiDAR glasses that help blind and low-vision people sense obstacles around them via a haptic feedback loop.
A CO₂ monitor that spends its life asleep — waking every 20 mins just long enough to measure, redraw its e-paper screen, and doze off again.
Made a Replica of Terminal from Fallout, powered by Lattepanda MU
Impedance spectroscopy and Edge AI on nRF54LM20 spot limescale early and send Bluetooth alerts before efficiency drops.
Autonomous multi-sensor environmental analysis payload integrated with ROS2 sensor fusion and custom PCB power distribution for rover.
Temperature, humidity, pressure and air quality on a 240x320 display: auto day/night dimming, history charts, alarms, JSON/CSV export.
To help blind and elderly people to move safely without hitting obstacles. Low cost automatic vehicle that scans and avoids obstacles by its
WiFi sensor with Wemos D1 mini and AHT20 + BMP280 module, integrated in Home Assistant, in a parametric 3D printed case.
An intelligent system that senses, learns, understands, and responds to its environment in real time.
WaterLens combines four water sensors, Arduino UNO Q and local Edge AI to recognize patterns and flag changes from a tap-water reference.
Autonomous AI-powered smart irrigation system on the nRF54LM20 for water resource optimization in agricultural industry.
Monitor electrical current, temperature, humidity, and motion in real time using ESP8266, ACS712, DHT11, PIR, and KiwisIoT.
An ESP32-S3 and Edge Impulse AI system that detects squirrels and uses red and green LEDs to show the result.
Flash an ESP32 from your browser, watch its readings live, get alerts when something is off, and change its settings later without a USB cab
A handheld device that lets you capture colors from the real world and turn them into usable digital HEX values. Built with an ESP32.
A professional open-source ESP32 air quality monitor with industrial sensors, solderless assembly, and local Home Assistant integration.
This project implements an Amateur radio operator-oriented clock with features intended to help in the Ham shack or portable operations.
Connects a Bresser 7in1 weather station and publishes sensors data to Wunderground and/or APRS servers. It uses LilyGO Lora32 OLED v. 1.6.1.
Will guide you to build an Outdoor Weather Station with DFRobot FireBeetle 2 ESP32-P4, Five Sensors, and a Live Web Dashboard
A weather station that talks, powered by real on-device neural speech. Build it once — then make anything you want speak.
A Pico W hub turning Cloud-AI forecast and Edge-AI security into soil alerts via an ancient statue's eye.
Developed a sensing system, interfacing an AHT21 sensor and 8-bit parallel 8080 display using custom STM32 drivers.
Place a Weather Station remotely on a mountain, radio transmitter and receiver using two LilyGO LoRa32 SX1262 equipment, network data relay.
Turn your Arduino ideas into robust industrial networks. ArduLora connects professional RS485 and 0-10V sensors to LoRaWAN effortlessly.
