Env-Sense: A wearable LoRa device tracking Temperature, Humidity, Pressure & VOCs, sending real-time data within a 1 km range for safer expo
This project serves as a starter guide on how to run a simple neural network on HARDWARIO TOWER IoT Kit Core Module.
ATMEL AVR ATtiny85 Breakout Board
Install the nRF Connect SDK on your computer to prepare for building and flashing apps to the Thingy:91X.
This is a cost-effective single-board computer. For engineers with experience in embedded SBC development, it's an invaluable tool.
Create custom FPGA IP using Python/MyHDL, integrate with Vivado, and control via PYNQ—hardware design with software simplicity.
This device lets you control your music or media on your phone/PC. This device works using bluetooth. Features: play, pause, skip, vol+, vol-.
RP2350 MCU + dual W6300s enable a transparent inline Ethernet bypass, forwarding frames instantly and supporting inline security filtering.
Wooden Reactor Simulator combining steampunk and sci-fi aesthetics, this project uses an ESP32 with an MP3 module and speaker. Open source.
Music streaming services are cool and all, but what your speaker could just play its own music?
This guide walks through how to deploy a custom XSA on the Kria KV260 with the new EDF/Yocto workflow for AMD FPGAs.
Are you tired of internet disconnections during power failures?
This time, let's briefly introduce the power circuit design
An M5Stack-powered NotiFY basic notification alert accessory.
A low cost, beginner friendly diy quadruped robot for STEM, science, ML experiments, and - first and foremost - fun!
Plant Monitoring Project with Automatic Watering System and Graphical Interface
Arduino IDE defaults to optimize your code for size. It removes no operation commands and changes the instructions you put in.
Learn how to use micropython to use your GPIO pins on your PSoC.
Developed by DIT this advanced SOM combines high computing performance with rich connectivity, making it an ideal choice for engineers.
This guide will help you to build an IoT-based shelf inventory management system using monoZero and monoZ Cloud.
You write short text notes for each photo — the device speaks them as the album is viewed, giving a way to share memories.
Build a Smart Distance Scale using Arduino Nano, OLED & Ultrasonic Sensor - perfect for DIY, automation & prototyping with JUSTWAY!
Hello and welcome back. In this project, we will learn how to make a Bluetooth control car with a 2WD smart car kit.
Midbar is my attempt to learn from the mistakes made by others (and later from my own mistakes) to make a better password vault.
