Making an UAV avoidance system using the affordable TFMini-S, a Time of Flight (ToF) rangefinder and ArduPilot flight system.
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
Spider is mech design which i used with Raspberry Pi Internet Radio.
Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well?
Using the sensors and controller of a drone, I created a rover to use the drone's stability features on the ground.
Drone built with Arduíno. Design was printed on a 3D printer and sketch on SolidWorks. It uses an MPU-6050 module to auto equilibrate.
Joystick controller emulates the output of the UDP Joystick App. Use for the PicoW Copter drone by anish-natekar or any UDP JS application.
I created an MKR1010 based enhanced telemetry system for Joop Brookings YMFC-32 drone project.
Rapid transportation and deployment of IoT platforms in any environment.
Adding a Jetson Nano/Xavier as a drone companion computer is common, but what about use cases for accelerated computing in drones?
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes.
Building a drone with an advanced visual system that recognizes crop growth, livestock, and trespassers.
What is the best way to experiment with drones?
This tutorial tests Erle-Copter flight modes (GUIDED, LOITER, CIRCLE and AUTO)
Building and Testing a Low Cost VTOL to reliable detect the GPS Position of Forest Fires on the Island of Gran Canaria
A Dji Tello Drone wifi controller based on M5Stack Core
Crops Yield and Optimization ML with UAVs surveillance and monitoring
Assist in devising solutions to control the fire damage with minimum casualty
Application notes for Pmod STEP and Arduino Uno. In this app, the motor makes a complete turn in one direction and then returns to origin.
NXP HoverGames Challenge drone designed to support firefighters doing search and rescue to evacuate people from the path of wild fires.
Stinger X210 is an OPENSOURCE Racer frame that’s so cute. Main body part is 3D printed canopy!
This is a multiwii 2.3 project with baro module BMP280 to build a mini quadcopter drone with diy brushed ESC (using mosfet)
IMU sensor data, attitude algorithm, Mahony filter, cascade PID controller.
Avalon project, is build with the idea to create a self flying vehicle. Avalon run on opensource hardware and software currently in dev
