Welcome to another ESP8266 project. Today we are going to build a DIY YouTube subscriber counter with a big LCD display.
Learn to measure temperature with high sensitivity using an NTC thermistor, STM32's ADC, and the Steinhart-Hart equation for precise results
Learn how to seamlessly integrate the STM32 microcontroller with the MAX31856 Type K thermocouple-to-digital converter
Build a simple IoT temperature and humidity Sensor which is connected to the Internet via WiFi and controlled with the Sensate Monitor app.
You'll learn how to construct an airsoft bomb with Arduino.
This can be used to design your own Arduino-based games, or simply use it as a gaming controller for your computer!
Builders learn about common electronic components used in a circuit and how to use a Liquid Crystal Display (LCD).
Mobile station for weather exploration with ATttiny85 and BME280 for your smartphone.
Made an Internet Clock from scratch using a custom ESP8266 Board.
Everything is possible with this sensor, you can display all values sent by others sensors, yahoo weather forecasts or anything else.
Generate random numbers for your display with the push of a button (with a nice animation too).
Simplest type of SDR radio, wich is a combination of very simple Tube RF Front end, Soundcard as A/D converter, and PC software.
How to Build an Arduino Nano Oscilloscope with OLED Display (SH1106) – Full Guide with Circuit & Code
This is a custom version of the Hunter game with 10 LED and LCD display to show the score, followed by various sound effects.
A practical use of the M5Stack Atom RS232 as part of a remote display.
This is a small temperature sensor, using a LM35, the value will be shown on the LCD102x64 screen.
it can be used in the special situations which normal humans should not close to, such the High radiation zone, the High infection area.
Use a high-speed port to transfer eight bits at a time on a graphical display 128x64.
Real-time pixels to LED display.
Connect Two Arduinos using I2C Communication by connecting a DHT11 sensor to the Slave Arduino and Display the Temperature on Master Arduino
Here in this tutorial we're going to tell you about how you can interface atmega16 microcontroller with 16*2 LCD in 4 bit mode.
My first build.
A simple Stereo VU (Volume Unit) meter that represents the intensity of an audio signal using a series of bars. VFD Display type is GP1287.
Yes, it's possible to run any.tflite model on MaaXBoard RT as long as it fits in memory!
