A short and simple introduction about the MQ-2 Gas/ Smoke sensor module.
This project will show you how to use an OLED screen (128 per 64).
A companion project to my solar powered, Adafruit IO weather station. See the weather station's current readings on your desk.
Circuit simulating elevator functionality using a Raspberry Pi.
Simulate Quadrature encoder on Virtual Arduino Simulator online. Learn Arduino programming online.
I found this shift register chip which is different to the most commonly used 74HC595. See how it works and what are the differences
Playback two musical scores simultaneously while showing synchronized lyrics
Portable FM-Radio receiver using Arduino Nano Every and TEA5767.
A simple way to represent the value of a potentiometer using a 16x2 LCD.
Build the basic version of the Soviet DIY computer UT-88 with merely Z80, Arduino Mega 2560, 16x2 LCD shield, 4x4 keypad, and 8 wires.
A simple yet high quality digital photo frame on Pi with Windows IoT and Angular 2 PoC for compatibility as Windows IoT front-end framework.
A low-cost SLM driver board would drastically increase the proliferation of advanced microscopy and holographic displays.
A never-ending quest. An infinite maze. How long will you survive?
New to embedded programming? Use MicroPython to read and display temperature and humidity on an LCD. No soldering or breadboard is needed.
#DonLuc #Environment #Microcontrollers #ESP32 #MQ #GPS #SparkFun #Adafruit #Pololu #Fritzing #Programming #Arduino #Electronics #Consultant
Adventure is Out There!
This is a tutorial about using a TFT LCD Touch Screen to make a clock that can show temperature and humidity at the same time.
Use a Raspberry Pi with CODESYS PLC to control motors attached to an Arduino Uno and EASE using input from another LCD Shield with EASE.
I decided to make another OLED game but this time I used my new ESP32 board. This board is fast and has lots of memory so it's perfect!
Keep track of the number of days till Christmas in a fun new way.
Build a smart ePaper badge to learn Seeed_GFX and EPD basics, with a hands-on project you can customize or extend.
Simple Wifi pager system.
Monitoring of CO2, temperature and humidity with MQ-135, DHT11 and Nano V3.0 CH340 with ATmega328p
You'll get an Arduino-compatible graphical LCD display for a low price and with minimal soldering skills.
