Turn a XIAO ESP32-S3 into a USB to I2C bridge with Bit Pirate, then read an LPS22 by register name in your browser. No code.
Device for testing IP networks
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Have you ever wanted to take a peek inside your code to see why it's behaving the way it is? With this guide you can!
All resource are given here free. Its easy to understand.
Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.
You need to send a command to Arduino.
Environment Pollution Monitoring system using Internet of Things-IoT United International University.
Methods described here will show you the best way to use your laptop/PC screen with your Raspberry Pi.
Easily include oscilloscope and frequency counter diagnostics into your own project.
Measure the unknown resistor with a simple configuration!
FPGA design use AXI networks, this can be a complex protocol to work with. Lets look at how you can access AXI using a UART and RPi PICO
This project walks through how to implement and use SPI in embedded Linux via the spidev kernel on the Zynq-7000 using PetaLinux 2022.1.
Today iam going to show you how to make led matrix clock With Arduino & Rtc. this is a simple project does not require high knowledge
This is the first board with Stratify OS support as more ports come for STM32.
A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
How to make a homemade electrocardiograph (ECG).
Check internal connections RJ45 cable, standard cable, crossover cable, and special cables.
Add an LCD to your projects to display data acquired from sensors, display your own custom characters, or use it as a debugging tool.
Get your Nano 33 IoT board connected to full GDB debugging so you can solve those bugs and get your project released!
Analyze digital inputs on up to six channels using the ATmega328 (e.g. Arduino Uno / Nano / Ethernet / Mini).
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Empower your electronics journey! Dive into X-Y display mode, craft the Octopus VI curve tracer, and master troubleshooting.
FFT spectrum analyzer is a test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.
