This guide walks through how to build a custom HDL design into the AMD EDF Yocto project for the Kria KV260 Vision AI Starter Kit.
This project walks through the steps of how I designed my own custom carrier board for the AMD Kria™ K24 SOM.
This project walks through how to create a fixed hardware design (fixed platform) for the Zynq-7000 SoC in Vivado 2024.1.
This project walks through the base workflow for accelerated application development on the Kria KD240 in Vitis Unified 2023.2
StarPointer is a DIY virtual electronic finderscope for astronomical telescopes.
This project walks through how to install an Ubuntu Linux distribution on the TE0802 MPSoC FPGA development board.
This tutorial walks through an application that reads/writes data to DDR memory from the Linux userspace on the Zynq-based Arty Z7 FPGA.
See how to generate a custom embedded Linux image for the Arty Z7 using PetaLinux 2020.2.
Learn how to set up your environment for the Raspberry Pi Pico and create a custom program for it
Enable the digital I/O available on the Arduino shield header of the MiniZed.
Take full advantage of Xilinx's Zynq FPGA chip by running both of its dual ARM cores simultaneously.
How to integrate DesignStart Arm Cortex-M1 and M3 processors with the Xilinx Zynq.
The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
Combines an accelerometer, an audio amp, a speaker, and one of the on-chip DACs on the LPC845 for audio-motion-enabled Jenga-type games.
An outfit made of Martian material. It provides awareness of its environment. Let's protect the Earth even if we can move to Mars.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
