Hardware and Software products

The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST conne...

Multi-sensor cellular IoT prototyping platform

SBC with a quad-core 1.8GHz RK3288 SoC, 600MHz Mali T764 GPU, 2GB of DDR3 RAM, Gbe non-shared LAN, Wi-Fi, 4 USB 2.0 ports & 40 pin GPIO.

An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones)!

Easiest way to add Ethernet to Raspberry Pi Pico

The Accelerometer Module can detect orientation and movement of your Tessel by measuring gravity / acceleration. It features 3-Axis digit...

The Arduino Esplora is a ready-to-use, easy-to-hold controller that lets you explore infinitive possibilities.

The Arduino Prototyping Shield makes it easy for you to design custom circuits for the MEGA standard Arduino pinout.

Arty is a ready-to-use development platform designed around the Artix-7 Field Programmable Gate Array (FPGA) from Xilinx

A pair of BNC-terminated oscilloscope probes, perfect for use with the Analog Discovery in conjunction with the Discovery BNC Adapter.

The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for sensing CO concentrations in the air.

COLOR is color recognition unit with integrated TCS3472 chip.

Next-generation JavaScript framework for robotics, with support for 36+ popular platforms!

This precise RTC adopts a DS3231M chip, which integrates MEMS resonator and temperature compensator.

The April is a handy companion for your Electric Imp card. This breakout board provides just the bare minimum for Imp life support - a so...

A complete set of Arduino's most common and useful electronic components.

Kit include Servos Horns x4 & Screw x3

Embedis is an open source library for creating simple embedded dictionary servers.

An embedded dosing pump.

This module is the best way to add a GPS to your wearable project.

A Faster and More Reliable Way to Build Better Software

The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30.

It features the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity.

a digital Humidity and Temperature Sensor which has an accuracy rate of up to ±1.8% RH and ±0.2 °C, and an operating range of 0% to 100% RH

Hercules Safety Critical MCUs from Texas Instruments

The Infrared (IR) Module can send and detect IR signals. The IR LED can be used to communicate with household electronics like television...

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming

Interact with the world using LabVIEW to control embedded platforms like Arduino, Raspberry Pi and BeagleBone Black.

M5GO IOT Starter Kit is designed for learning IOT programming which consists of 6 units(ENV, IR, RGB, PIR, ANGLE,HUB), one white M5GO bottom

Endless possibilities in constructing your own design. Use and reuse our aluminum beams.

The ARM mbed IoT Device Platform provides the operating system, cloud services, tools for the ARM developer ecosystem.

The mc-Module is a computer like device that is incredibly small, powerful and energy efficient.

MSP430FR6989 LaunchPad Development Kit

For individual developers,myAGV is a preferred choice as a robot platform with multiple functions at an affordable price.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface

Extend all pins of the Arduino out to 3.5mm pitch screw terminals, and prototype away on a shield with rich I/O elements.

ProtoStax Enclosure for Raspberry Pi 5 / 4 / 3 Model B/B+ gives you a modular prototyping enclosure that can fit several different Pis

20 GPIOs, 2.4GHz WiFi, BLE 5.0, 8MB PSRAM, 16MB FLASH, esp32-s3 dual-core, battery charge supported

Tiny GSM/GPRS module with SIMCOM's SIM800H. Measuring only 39x48[mm] this module has everything you need to "IoT enable" your next project.

The Base Kit empowers you to jump start your development of voice interfaces, easily integrating the Snips AI Voice Platform with hardware.

Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.

H0FR60 is a compact solid state relay (SSR) module capable of driving AC loads up to 600V and 1.2A.

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header

Designed to build IoT prototypes and demos without building hardware or firmware

Twitter works with IFTTT to automatically share Tweets, update your profile, make lists, and more.

The microUSB Programming Adaptor (uUSB-PA5 and uUSB-PA5-II) is a USB to Serial-TTL UART bridge converter which is simple, cost effective, ve

Measure real CO2 levels with our PAS CO2 Shield2Go

ZedBoard is a low-cost development board for the Xilinx Zynq-7000 AP SoC.

Raspberry Pi compatible SoC module integrating Xilinx Zynq-7010, 512 MByte DDR3L SDRAM, 4 USB ports, Ethernet port and 16 MByte Flash memory

M5Stack Official Stock Offer ! 2x15 Pin Headers Socket 2.54mm Male & Female 4 Pair Connector for M5Stack Core Development Kit

Specifications Output Power: Min 2

PyPortal, our upcoming easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes.

With AIY Projects, makers can use AI to add natural human interaction to their own Raspberry Pi projects. Made by you with Google.

Build your first Internet of Things project or simply make an existing device smarter.

3D modeling software for designers and engineers

A fully managed service for real-time streaming data ingestion and processing – simply create a stream and let the service handle the rest.

Ultra-Mini Bluetooth CSR 4.0 USB Dongle Adapter Connect to your MetaSensor.  

3.7 V Battery that plugs directly into C.H.I.P.! Make that project portable!

A free-to-use cross-platform SDK that lets your applications send and receive data using sound, using a device's existing speaker and mic.