Hardware and Software products

WIFI & BLUETOOTH CORE

The LMP91000 is a programmable analog front-end (AFE) for use in micro-power electrochemical sensing applications.

This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal.

Based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225).

This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC

Microcontroller:ATmega328 Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V Digital I/O Pins:14 (of wh...

Interact with the world using LabVIEW to control embedded platforms like Arduino, Raspberry Pi and BeagleBone Black.

FACES Kit is a kit composed of M5Core GRAY, functional keyboards, FACES Base, FACES Charger and some accessories

M5Stack recently launched the new AIOT(AI+IOT) Camera powered by Kendryte K210

mcStudio is the Integrated Development Environment used to connect and program the mcThings modules and devices!

The classic compact camera for Raspberry Pi with a 12MP sensor and autofocus

This RobotGeek Light Sensor is an analog sensor that will allow you to measure light from your Arduino or other microcontroller.

Development board for Renesas RZ/V2L in a Raspberry-Pi form factor

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped ...

Adaptable Accelerator Cards for Data Center Workloads

The Ambient sensor can detect sound and visible light levels. The microphone is optimized for detecting the ambient noise level in a room...

This 3D printer is loaded with many great features including a TFT touch screen, easy and fast assembly, and a rigid metal frame.

The quadcopter for hardware makers.

Arduino Uno click shield is an extension for Arduino Uno and any other Arduino-compatible board.

Robots. Fast. BeagleBone with integrated robotics features and ready-to-use library.

Code Composer Studio Cloud IDE

The Climate Module can detect relative humidity and temperature from your environment. it is able to measure 0 to 70 °C (32 to 160 °F) wi...

This is a mini vibration motor suitable as a nono-audible indicator.

Professional video and photo quality, plus powerful features to capture and share your world.

This is just a marker for our official Hardware 101 projects. :) Visit hackster.io/hardware-101 to see more!

A LattePanda is a complete Windows 10 single board computer. This is a 2GB RAM LattePanda with 32GB internal memory.

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you r...

Hook up simple circuits and components to your Raspberry Pi or Arduino

The Mega-B Development kit is a tool for rapid prototyping of an IoT prototype, from hardware to the cloud.

NCIR is a unit can measure body temperature or be applicated for movement detection which integrates MLX90614

Nicla Vision allows you to build your next smart project. Connect devices, visualize data, control and share your projects from anywhere.

O Watch is an Arduino compatible smartwatch kit for kids to get started with hands-on programming and 3D printing.

Add precise capacitive touch, distance sensing and high quality audio to any Raspberry Pi with a 40 pin GPIO connector.

The Pmod RTCC is a real-time clock/calendar that allows users to configure up to two alarms that can be triggered at a variety of times.

The STM32 Nucleo-144 boards (NUCLEO-F207ZG, NUCLEO-F303ZE, NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-F446ZE, NUCLEO-F722ZE, ...

The 3.5's more powerful sibling, this Teensy rocks 11 touch inputs, 2 CAN bus ports, and a mega-powerful ARM Cortex M4.

Thanks to Bosch, now we’ve got a three-in-one, low-cost and high-precision environmental sensor, the Grove - Temp&Humi&Barometer Sensor (BME

Using only two I2C pins, control 16 free-running PWM outputs!

Enables connected devices to order physical goods from Amazon when supplies are running low.

The Arduino Uno Rev 3 is a microcontroller board based on the ATmega328, an 8-bit microcontroller with 32KB of Flash memory and 2KB of RAM.

Amazon CloudWatch is a monitoring service for AWS cloud resources and the applications you run on AWS.

Turn text into lifelike speech using deep learning

Use widgets to display device data and send commands in real time. Control your Raspberry Pi and other IoT devices remotely.

A USB accessory that brings machine learning inferencing to existing systems with Google's Edge TPU.

The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM.

The innovative Electric Imp Platform begins with the imp modules, which easily integrate into products to provide secure WiFi Internet co...

100% compatible with Arduino and STM32.

Espressif's ESP-WROOM-02 is a low-power 32-bit MCU Wi-Fi module, based on the ESP8266 chip. TCP/IP network stacks, 10-bit ADC, and HSPI/U...

The Future Board is an ESP32-WROVER-B based educational hardware suitable for kids to learn and experience hot topics such as IoT and AI.

It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smoke

This is an Arduino LPG gas sensor. It has MQ5 probe which is very sensitive with LPG, natural gas , town gas.

Grove is a convenient plug-and-play system with specialized interface, but that doesn't mean it couldn't be used in open ecosystem like brea

A Low-Cost/Low-Code platform, for everyone !

Microcontroller:ATmega2560 Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V Digital I/O Pins:54 (of w...

Stream data from your devices and applications to beautiful visualizations in your web browser.

Based on LoRa™ spread spectrum modulation , Low Power with Long Range 433MHz Module WT-900M

The Myo armband lets you wirelessly control technology with gestures and motion.

The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.

PHPoC WiFi Shield 2 is the next generation of PHPoC WiFi Shield. It is equipped with wireless LAN and support various expansion board