Hardware and Software products

It features an onboard Bluetooth antenna, onboard battery charging chip, and 21*17.5mm thumb size, which makes it ideal for IoT projects.

Seeeduino XIAO(Pre-Soldered) is the smallest Arduino compatible board in Seeeduino Family. It is an Arduino microcontroller that is embedded

Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4

Seeeduino Lite shares many similarities with Arduino Leonardo. It is a microcontroller board based on Atmega32U4 chip.

It is a development board with LoRaWan protocol embeded, through which you can get started quickly to experience LoRa's advantage IoT.

TAPAS is a 48V GaN (Gallium Nitride) based three phase inverter board with on board filters developed by Siemens SDI

SIM808 GPS/GPRS/GSM Arduino Shield is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino shield.

TI Micrcontrollers with integrated connectivity

Extend the reach of your base station to each room in your home, and interact with the hardware based on where you issue voice commands!

Sonoff TH10/TH16: Temperature And Humidity Monitoring WiFi Smart Switch

The smallest SoundTouch® system, streaming in full, rich sound.

The SparkFun 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performa...

The SparkFun 9DoF Sensor Stick is an easy-to-use 9 Degrees of Freedom IMU. The Sensor Stick deftly utilizes the LSM9DS1 motion-sensing sy...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

This board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system.

The SparkFun MIDI Shield board gives your Arduino-based device access widely used and well supported MIDI communication protocol

A WiFi/Microcontroller development board in the Arduino form-factor for the Photon. Easy to use, powerful, and connected to the cloud.

The SparkFun Photon Weather Shield is an easy to use add-on board that grants you access to barometric pressure, relative humidity, and t...

STEMLab 125-10 has 10bit input / output channels and is perfect for universities, students and makers.

StepperMotorYH42BYGH40-402A

Linux/Android-driven microprocessor series with Arm architecture.

Syntiant’s TinyML Development Board is the ideal platform for building low-power voice, acoustic event detection and sensor ML applications.

Tang Nano 9K FPGA is an exquisite development board based on the Gowin GW1NR-9 FPGA chip following the Tang Nano 1K and Tang Nano 4K. It com

This long-range TinyShield is set to operate at 433MHz and can transmit at up to +20dBm and is very easy to use.

The mcTrak330™ combines SIGFOX™, WIFI location, and long range mcAir™ Low Power LAN protocol into a compact location tracking device.

The uCAM-III (microCAM-III) is a highly integrated serial camera module which can be attached to any host system that requires a video camer

Quantify the worldwide safety environment through three main drivers: Resources and Institutions, Safety Frameworks, and Safety Outcomes.

We've stepped up our LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness!

A Coin-sized Linux Computer with WIFI

Water Detect click is used for detecting water and other electroconductive liquids. If the detection area is wet the output of Microchip'...

Wio Tracker (Wireless Input Output) is an open source gateway which enable faster IoT GPS solutions.

6LoWPAN device for Network and IoT applications, IPv6 native with a powerful Cortex M3 onboard.

The 10 DOF Mems IMU sensor is a compact and low cost IMU from DFRobot. It integrates the ADXL345 accelerometer, the HMC5883L magnetometer.

The CC3000 hits that sweet spot of usability, price and capability

The perfect portable enclosure for mini electronics. And sometimes breathmints.

Apple's watch, with modern design and futuristic smarts.

Arduino Gemma is a miniature wearable microcontroller board based on the ATtiny85.

Endless possibilities, powerful processor functionalities.

The perfect board for your IoT projects

By executing powerful instructions in a single clock cycle, this device balances power consumption and processing speed.

High-performance Microchip picoPower® 8-bit AVR® RISC-based microcontroller

A decentralized network for the Internet of Trusted Things (IoTT) that enables privacy and returns the ownership of data back to its owners.

The MXP Breadboard provides a 300 tie breadboard & 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP).

Use to trigger various actions

The Signaloid C0-microSD is a hot-pluggable co-processor module in a microSD form factor, based on the popular Lattice iCE40 chip.

DSPs from Texas Instruments

CC3220SF LaunchPad

Kit with 4 enviromental sensors - temperature, humidity, light intensity and atmospheric pressure. You can use it e.g. as Weather Station.

A gas sensor for measuring the carbon dioxide (CO₂) concentration

Create programmable projects with conductive tape on a brick building system or as a wearable with conductive thread!

I²C Current Monitoring Controller

Dabble - One App for Sensing & Control that simplifies project-making, wireless hardware control, sensing, IoT & much more.

DC Motor Controller is a Smart Expansion board for PHPoC Shield, which is designed to control Brushed DC motors.

Portable Logic Analyzer and Digital Pattern Generator

Laboratory grade probe for measuring dissolved oxygen (DO).

The DMM Shield brings the functionality of a digital multimeter to a convenient shield form factor.

Designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.

Eddystone is an open beacon protocol that defines a Bluetooth low energy (BLE) message format for proximity beacon messages.