Hardware and Software products

MIPI 5MP AF Camera for QUAD/DUAL

Get the headset, two wireless controllers and two base stations enabling 360° room-scale motion-tracking when you order Vive. Be among th...

Several kinds of LED Strips have already been available in our bazaar for a long time, however, there were no Grove compatible LED strips.

Webduino Blockly is a visual programming editor

WebUSB programmable FPGA development boards. Cloud-based synthesis.

FCC/CE Certificated ESP8266 Wifi Module

This is lightweight, small size, high efficiency, low consumption and low noise water pump

Need power? This ultra low profile power supply delivers at a whopping 24 volts with 14.6 Amps!

This breadboard has two power buses, 10 columns, and 30 rows - a total of 400 ties in points for Arduino and Raspberry Pi project.

The CC110L RF BoosterPack is a low-power wireless transceiver extension kit for use with the TI MSP-EXP430G2 LaunchPad development kit.

The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC.

4-port Relay Board is a Smart Expansion board for PHPoC Shield and Arduino. It carries 4 relays.

The MR60BHA1 60GHz radar module applies FMCW detected theory to implement simultaneous personal breathing rate and heart rate detention in h

7inch HDMI/USB Display/Touch for UDOO X86

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly!

This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller.

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is a toolkit to ...

A MKR Format shield to connect to 485, Modbus and DMX

Build your first Internet of Things project or simply make an existing device smarter.

Save data from your MKR board

This shield really helps you prototype wireless applications.

Device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Designed as a power supply source for the battery-operated units

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator.

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!

Fuel Tank BoosterPack

CardKB is a unit can achieve QWERTY full keyboard.

A creative and fun way to learn electronics with peel-and-stick stickers.

The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 APSoC.

A lite version of the Core Module without the radio module assembled

Creator Ci40 is an IoT-optimized dev board that features 802.11ac 2x2, Bluetooth and 6LoWPAN wireless connectivity.

The Curiosity Nano Base for Click boards is more than just a base board - it’s the ultimate rapid prototyping base.

The DC motor shield is a small evaluation board equipped with TLE94112ES for use with Arduino.

Easily integrate image sensors into your camera projects

ARM Cortex-M4F based MCU TM4C1294 Connected LaunchPad

Well suited for any space-limited or battery-operated applications with its ultra-small size, robust performance and low-energy consumption.

Espressif's ESP8266EX is among the most integrated Wi-Fi chips in the industry. Measuring just 5mm x 5mm, ESP8266EX requires minimal exte...

The Espressif SDK is a bundle of utilities and device-level APIs for our ESP8266 and ESP32 series of wireless chipsets. Optimized precomp...

When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be used on all kinds of 3.3V/5V main controllers.

FINGER is a fingerprint recognition unit.

This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller.

An analog output pH monitoring meter kit.

This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG).

This is an arduino rotation potentiometer , it is able to rotate upto 300-degree.

This arduino digital capacitive touch sensor provides a one-touch style switch on your Arduino project.

This weight sensor kit is equipped with all the accessories needed to build the scale which reduces the difficulty of structure construction

Accurate, durable, highly compatible and easy to use, it has all the attributes of a superior sensor requires.

Based on the excellent ADXL-345, this digital 3-axis accelerometer has excellent EMI protection.

The Grove Base Hat for Raspberry Pi provide Digital/Analog/I2C/PWM/UART port to meet all your needs.

Grove - Electromagnet can shuck 1kg weight and hold on.It is easy to use and also easy to learn the electromagnetic principle.

This is a very tiny motor driver with I2C interface which includes two DRV8830 motor driver chips.

The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers.

There are only two weeks away from Valentine‘s Day! We've specially prepared a demo using Red LED matrix and full step-by-step tutorial to l

This product includes one control board and two interchangeble lenses, a great camera for Arduino centered image recognition projects

AI is transforming every walk of life. Go and explore its magic with this kit!

Build remotely controlled applications and improve everyday life with smart IoT devices!

The perfect way to get started developing on DIY drones.

This is an 8-megapixel camera with a FOV (field-of-view) , which is suitable to use with the NVIDIA Jetson Nano and NVIDIA Jetson Xavier

A Wi-Fi 802.11n + Bluetooth 4.1 (Dual Mode) add-on board for any Raspberry Pi model with the 40 pins GPIO connectorhttp://redbear.cc/wp-cont