Hardware and Software products

This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C.

The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331.

Based on MPU-9250 and BMP280. which combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor

10 Leds Arduino Library Easy-to-Use

The Grove-Mech keycap is a mechanical switch with a build-in LED. The 255 full color RGB LED makes it simple and easy to show the statues

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

Single high-speed voltage comparators

Raspberry Pi 3 B/B+ microSD card image. Standard Raspbian with added MQTT, Node-RED and Radio Gateway.

Raspberry Pi with pre-installed bc-raspbian together with Radio Dongle

In this design, we dedicated the last GPIO (GPIO.3) to a buzzer for alarm notification applications.

This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!

Designed to get student ready for Industrial IoT applications

The JeVois-A33 smart machine vision camera combines a camera sensor, embedded quad-core computer, and USB video link in a tiny package.

Kinetis KW41Z is supported by a rich set of software enablement, including MCUXpresso Software and Tools.

Description: The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single b...

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another.

The complete kit to assemble and start training your LittleArm

LoRa Arduino Shield is an extension for Arduino to send data over long distances with extremely low data consumption.

14 SIZES! Compared to most screws, they are ultra low profile. This means plenty of clearance.

The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux.

M5GO Lite is a small kit which consists of one ENV unit, a M5Core(based on ESP32 chip) and a M5GO bottom. It’s a simple version of M5GO KIT

M5Paper is M5Stacks latest core device with a touch-enabled E-ink display.

IR is an infrared photoelectric pair unit that integrates a pair of infrared transmitting and receiving tubes.

Send - receive data using web requests REST/SOAP, SSL Secure connections, 10 data channels, unlimited values, shared resources

Ultra-Low Power, Single Channel Integrated Biopotential (ECG) AFE with HR Detection Algorithm (R-R)

An integrated sensor platform that helps customers evaluate Maxim's complex and innovative medical and high-end fitness solutions.

WEIGHT is a metering unit that integrates an ADC chip dedicated to the scale design.

The Base securely holds four Modulos and connects them together. Need more than four? You can daisy chain Bases for larger projects.

World’s first MotionTracking devices designed for the low power, low cost, and high-performance requirements of smartphones,

MSP430FR5969 FRAM LaunchPad Development Kit

DevKit with sensors on board, Microsoft Azure IoT connectivity ready, Arduino-compatible

2kg Payload Commercial 6 Dof Cobot

The Nexys A7 is the new name for our popular Nexys 4 DDR board, now available in two FPGA densities!

Nicla Voice allows for easy implementation of always-on speech recognition on the edge with Syntiant’s NDP120 Neural Decision Processor.

*DISCONTINUED* The nRF24 Module is used for wireless communication without WiFi. It's great for low-power mesh communication between Tess...

ObjectBlocks IOT Platform consists of a visual programming interface and data dashboard for IOT products

ObjectBlocks is an Arduino shield that provides bluetooth and Wifi capability - and works seamlessly ObjectBlocks IOT platform.

OpenCV AI Kit (OAK), an MIT-licensed open source software and Myriad X-based hardware solution for computer vision at any scale.

Otto is truly Opensource, Arduino compatible, 3D printable the perfect opportunity to build and have your very first robot

The Pantri API is the place to send grocery replenishment data to, from whatever Smart device you can dream up!

Provides 3-pin interfaces, Allowing easy connection of motors, sensors or I/O devices to PHPoC

With Stepper Motor Controller Ⅱ, you can control a stepper motor more precisely. It supports microstepping up to 1/32.

The Pmod AD2 is an analog-to-digital converter powered by the Analog Devices AD7991.

The Pmod CLS is a character LCD module driven by the Atmel ATmega48 microcontroller.

The Pmod CON3 can be used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque.

The Pmod DA4 is an 8 channel 12-bit Digital-to-Analog Converter run via the Analog Devices AD5628.

The Pmod MIC3 is a MEMS microphone that allows users to adjust the incoming volume to the system board with the small potentiometer.

The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD.

ProtoStax for Raspberry Pi A+ gives you a modular prototyping enclosure that can fit a board with the Raspberry Pi Model A/A+ footprint

ProtoStax for Raspberry Pi Zero gives you a modular prototyping enclosure that can fit up to 4 Raspberry Pi Zero boards & a mini breadboad

Top actuated microminiature SMT switch ideal for implementations such as keyless entry, remote control or control panel application.

With Semtech® SX1276 at its core, the RAK811(WisDuo LPWAN Module) takes advantage of all LoRa® features.

The Raspberry Pi 2 Model B is the second generation Raspberry Pi.

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processo

A stylish, small, and adjustable mount for your Pi Camera.

Jetson-10-1-A0 is a hand-size edge AI box built with Jetson Nano production module, rich set of IOs, aluminum case, passive heatsink, pre-in

Jetson-20-1-H2 is a hand-size edge AI box built with Jetson Xavier NX 16GB module, rich set of IOs, aluminium case, cooling fan, pre-install