Projects made with Texas Instruments on Hackster.io
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
Read up about this project on
With this device I can keep my cellular connected IOT device fully charged with only 3 hours of sunlight a week!
A BBQ thermometer with 4 separate probes. Control settings, monitor progress, and get notifications on your phone.
In this project, we have made an automatic water tap using Arduino and IR sensor to solve the problem of wastage of water in our daily life.
Can a guy sitting in Asia control a robot in Europe? Well, now he can! Control your robot wherever in the world you might be!
This distiller converts the entire drainage water from our college NITK into pure drinking water free from soluble and insoluble impurities.
Each node has an MSP430 micro, sensor, LCD & subGHz RF radio. Multiple nodes send data to a subGHz-to-WiFi bridge for cloud connectivity.
This Arduino robot has a sensor that can detect any object near it and can follow this object.
This Project is made using TI-RSLK. This robot is controlled through the navigation button using TI-RSLK app.
8,000 RPM motor with a guitar pick! Crazy! You will shred faster than any other guitarist!
Hacking two cheap HC-SR04 ultrasonic distance sensors and a launchpad to create a spread spectrum phased array Sonar.
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
Using one Arduino Uno board to control 88 solenoids to play piano.
Build a 6LBR using a Raspberry Pi Zero and CC2650 LaunchPad.
FM radio built using Arduino, RDA5807M, Tiny RTC, PAM8403 class D amplifier modules, and TR028 touch panel.
BBC Micro connects to WiFi, accesses games over the Internet.
Use CapTIvate technology for multi-touch with 64 pads!
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
Build a line follower using an LM324N with a backup Arduino Nano.
We are innovating the world of sound engineering. Using cutting edge technology, we bring you a buzzer whose frequency is keyed to a dial.
IoT and Cloud - Combine these potential technologies to effectuate an automation system at home!
Don't stumble around looking for the light switch, turn it on before you walk inside using a bluetooth-enabled android phone!
An astronomical clock with 16 functions, with only three shift registers
This is a low-cost stethoscope built from off-the-shelf parts that listen and classify the sound of your lungs.