How to use Detect Human HC-SR501

Before start, below URL link is a basic tutorial for how to use skiiiD

https://www.hackster.io/skiiid/getting-started-with-skiiid-editor-f69b5d

Video Instruction

Step 1. Launch skiiiD and select Arduino UNO

#1 Launch skiiiD and select New button

#2 Select ①Arduino Uno and then click ②OK button

*This is Tutorial, and we use Arduino UNO. Other boards(Mega, Nano) have the same process.

Step 2. Add Component

#1 Click '+' (Add Component Button) to search and select the component.

#2 ① Type 'Detect' on the search bar or find the Search Detect Human HC-SR501 on the list.

#3②Select Detect Human HC-SR501.

#4 then you can see ③ pin indication. (You can configure it.)

*This module has 3 pins to connect

skiiiD Editor automatically indicate pin setting *configuration available

[Default Pin Indication for Detect Human HC-SR501] in case of Arduino UNO

GND: GND

OUT: 2

VCC: 5V

#5 After configuring pins ④ click ADD button on the right below side

void DetectHumanHCSR5010Interrupt1() {
	if(digitalRead(2) == HIGH) {
		// When triggerd
		
	} else {
		// When released
		
	}
}

Contact and Feedback

We are working on components and boards libraries. Feel free to use it and feedback us, please. Below is contact methods

email: [email protected]

twitter: https://twitter.com/skiiiD_official

Youtube:https://www.youtube.com/channel/UCfS2RQL3m3hVoHkFo4R0AnQ

skiiiD user forum:https://www.facebook.com/groups/skiiiD/

Comments are fine too!