Click on, click off, the project! A simple push on, push off button, that turns an LED on and off with one pushbutton.
I've a small and sweet Raspberry Pi Zero. Now I can switch off my Raspberry Pi Zero without a monitor or keyboard or LAN.
Always forgetting the opened toilet lid? Men, let us educate you!
This tutorial will show you the easiest and best way to use a pushbutton with your Arduino board!
Build a treasure chest or use an existing storage box, attach a push-button quadrature rotary encoder (endless spinning dial) and lets go!
Quick Project to Interface Push Button with Raspberry Pi
Turn Off the light, and it will turn ON: endless fun!
Learn about some basic transistor circuits, we will look at the BD139 & BD140 Power transistor pair and look at circuits for Arduino/ESP8266
This project shows tilt sensors and its functions.
Recreate your favorite night lights from the Rainbow Building with rainbow vibe lights.
Arduino Nano based relay power switch for Raspberry Pi 3 (Kodi) operated by common TV remote controller.
In this simple tutorial we will learn how to turn ON/OFF 4 LEDs with a 433MHz RF Remote and Arduino. Watch the Video!
A Bongilcheon High School Innovation Lab project.
A simple and small music box with customizable tunes. Parts involved? Arduino Micro, buzzer and a switch.
A step by step video for Arduino beginners
Switching is a major part of any IoT project and I will explain how I used a water level switch.
N this tutorial, I will share how to set up and use a smart switch using the Tuya IoT platform.
How to interface a 220V load with the Arduino in safety mode.
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Tessel listens for a clap, then toggles a relay to turn something on and off.
This project uses two particle photons to control the blinds in your house. Flip a switch and the blinds will open or close.
Sonoff TH10/TH16 is a smart switch version of Sonoff which can monitor and set temperature and humidity through the iOS/Android app eWeLink.
We can make our own relay module circuit for our project at a cheap cost and we can customize to our liking.
Learn how to power the micro:bit from the battery holder of Snap Circuits.
