Ultrasonic distance sensors are designed to measure distance between the source and target using ultrasonic waves.
This project will teach you guys from basics to build an ultrasonic radar sensor system at home using Arduino IDE and Processing IDE.
Matlab can be used to process and display data from a microcontroller. This is a really simple example on how to do that.
I attempt to map the shape of my room using four HC-SR04 Ultrasonic distance sensors and a magnetic compass to measure the heading.
In this project, you can build and display a sonar system by using graphical programming software Kittenblock, developed based on Scratch3.0
A simple device to measure the distance to the nearest object. We have made it fun by adding sound and lights if the object is too close.
Use a Raspberry Pi to link a sonar range finder with a kids xylophone. Different notes are triggered at different ranges.
Olimex Pinguino Micro board & hc-sr04 ultrasonic sensor with output to CDC.
This device is better than the similar devices made with an Arduino microcontroller board thanks to the stronger microprocessor and the well
A game where you race to accurately shift gears and control the clutch, gas, and brake to reach top speed in the quickest time!
This project builds on the open-source 3d printed modular educational robot with Adafruit Crickit, Circuit Playground Express obstacle avoid
In this tutorial we will learn about how to make a automatic sanitizer with additional features using Magicbit
This is a distance calculator(range 30cm), made with arduino, ultrasonic sensor and oled display... It is a beginner level project....
How I build Arduino nano based Radar and what I used inside the project
This project describes how to use a sonar to illuminate or modify blink rate or brightness of an LED programmed in MIcroPython
Ever been bored having to place all your solutes into solvents? With this, you can happily catapult them into their respective beakers.
