Among RISCV-based Single Board Computer, VisionFive is really prestigious member. I'm using it for Home Automation Project.
This is a wifi based smart plug that can make nonsmart appliances into smart appliances. The smart plug can control through our mobile or pc
Revolutionize poultry farming! 'Monitoring Temperature and Humidity in Chicken Coops' with NodeMCU ESP32, DHT11, and Telegram Bot
Smart projector is a portable projector which can be recharged. It can be connected into Bluetooth, WiFi, GPS, Android.
Through this guide you will get an idea for the design and development of low-cost with the help of readily-available water flow sensor
This project teaches you how to make a simple, yet smart DIY rat trap that no rat can ever escape.
This project is to implement a Smart Watering IoT device based on live data being monitored from multiple on board sensors.
gBridge allows you to use smart voice assistants to control any platform, like embedded systems or open source home automation software.
How to Monitor Raspberry Pi Pico W Internal Temperature via Mosquitto MQTT Broker over LAN
Unlock the future of refrigeration with our student-crafted Smart Fridge, combining IoT technology for seamless monitoring and control.
Automatic window opening by Arduino
Carrier Board for ili9341 and Lolin D32 Board
In this Article, we learn about how to make DIY Ultrasonic Range Finder with ESP32.
I am amazed my the performance and ML model architecture in this small module running on 32 bit core. Very straightforward to interface.
In this tutorial, we will cover making a security motion detector that sends you push notifications whenever it's triggered.
Made a Macropad using Raspberry Pi RP2040 and custom PCB
Controlling home appliances using bolt iot and google assistant.//Home automation
Have you ever wanted a small touch display that is not just a screen but a full ESP32-based development board?
Turning my solar heater project into a pool cover pump, now with voice controls through Google Assistant.
This is a IoT Model built using Bolt IoT Wi-Fi module that automatically switches on/offthe light, depending on the room brightness
This project is meant to give users the ability to have temperature dependent fan speed while working out.
How to use a Wia Dot One with a Grove Servo Motor to make the servo lift a flag on a mailbox whenever you get a new email.
CYBER. PY is a compact Raspberry Pi-powered mini PC-CYBERDESK made from a 7-inch LCD display connected to an RPI 4B+ and 3D-printed parts.
We can send this robot to remote places where humans cannot reach, and can also get the temperature of that place.
