Secure OTA via Azure. Control via voice capable UWP app. Includes sample: room thermostat controlled via phone.
How I created a $10 ESP8266 GPS Tracker that uses Open Wi-Fi networks & DNS exfiltration for communication.
This project prevents unauthorized people from controlling devices by using unlock pattern.
Scan, select, attack any wifi network nearby and get the password.
Use the LinkIt ONE to make a Keyless door entry system, which opens via a web app on your smart phone with a secret KeyCode.
The system will only give access on scanning the right tag. There will be a master tag that will be used to add/remove other tags.
This module automatically counts the number of people entering or living in a room, home, etc...
Use an ESP32 Cam and a passive infrared (PIR) sensor to create a motion-activated security camera that posts photos to a Discord channel.
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
This is a tutorial for making an RFID badge scanner with LCD. This could be used for home security or any project with ID badges.
It's a Morse code receiver base on processing the light signals.
Using OpenCV open source library with a IP camera using RasPi3b
Convert a cheap smoke detector with Bluz DK to a useful IoT device.
If an accident or any gas or smoke leakage is detected, it notifies through call and through Blynk app.
In this tutorial we'll try to analyze how alarm systems signals might be sniffed and cloned using a cheap Arduino and some RF modules.
For DETECTING fire for about a small range of 3 feets
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
This project's name is Servoradar as you know it is a radar so it is used to detect the object and then display it in the serial monitor.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
I MADE A coronavirus sensor say that there was a person there behind the sensor or they were holding it once the first red light goes on.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
Two versions based on Grove Light Sensor, one is reset by a push button, the other one requires a passcode
BLE and Bluetooth Jammer with nRF24L01 and ESP32
RFID door lock with ESP32 + Microchip 25AA512 SPI EEPROM + SPI 2.4 TFT + WiFi logging on server.
