I will describe to you the simplest way so far, to make PEMF device yourself and try the effects of this type of therapy.
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
A low-cost SLM driver board would drastically increase the proliferation of advanced microscopy and holographic displays.
Fabrication of a 3D bio-printer from an off-shelf 3D printer (Prusa). The bioprinter is used for constructing 3D scaffold from hydrogels
Develop a low cost, open source, waste plastic extruder.
Everything you ever wanted to know about the Open Smart Rich UNO R3 Arduino board used in the 2019 Biomaker Challenge.
Make an shake table to simulate earthquake at different frequencies, build earthquake-proof structures and test out their seismic resistance
The design and assembly of a DNA transilluminator allowing to examine the results of gel-electrophoresis procedures.
Tutorial for how to set up the Biomaker Challenge starter kit.
Reading sensor devices for display and storage.
A remotely controlled chamber in a coldroom/fridge that allows the heating of stored items to a desired temperature before being used.
A cool Newton's cradle made from ping pong balls containing WS2812B LEDs.
Learning how to handle input and output signals in XOD.
How to use XOD to program the mBot robot system.
6-unit (100ml) chemostat microbial bioreactor (recommended for long term microbial evolution experiment).
Adapting Panasonic camera for field imaging of small biological specimens with video-rate acquisition of extended-focus macroscopic images.
Convert a RepRap 3-D printer into an extremely affordable optical microscope.
This device generate a high-voltage pulse from a low-voltage DC supply
Description of the Totem Maker system for construction of custom instrument chassis and robots.
Outline of the XOD graphical programming environment, which uses a data flow model for programming Arduino microcontrollers.
Tutorial on how to use the Gtronics Protoshield Plus "giant prototyping board," from the 2017-2018 Biomaker Challenge.
How to connect to devices on the multifunction Arduino board, including real-time clock, temperature sensor, 4-digit display, etc.
This project teaches you how to calculate the time period of a simple pendulum using an IR sensor and evive.
With the Sony Spresense board, this plant engages conversations with Siri, monitors environment conditions and learns about data science.
