In this tutorial will show you the first step of UNIHIKER's environment setup.
This video will build an Arduino "IR remote robot tank. " We will provide assembly, components, and circuit details. The robot uses Arduino,
Yikes... This is a complicated and expansive build and mod. It has become my most complex. Read to find out more.
The myController S570 has high data acquisition speed and remote control ability, greatly simplifying the programming of humanoid robots.
Control a robotic hand with a Leap Motion hand tracker, plus save hand animations to replay later.
Build a DIY EMG-controlled prosthetic hand! Use the Muscle BioAmp Shield (Arduino Uno shield) to read and act on muscle signals.
This project outlines the process and outcomes of swiftly developing the StampCube Robot using M5 Stack's Stamp-S3A.
I am an open source hardware trailblazer and will use this account to share projects as a guidebook for academics
Arduino shield for 2WD smartcar
A Plant watering system for busy folk
We can start the Roomba with a quick voice command before leaving the apartment to keep the floor clean by the time we get home.
A turntable that works in conjunction with the 4-legged walking robot.
A Camera Vision Robot using colour tracking mechanism to detect an object & follow it. The project is made with a MAXDUINO board.
Build your own door lock, automatic trash can or control a robotic arm using micro servo SG90 and Surilli GSM.
Autonomous Unmanned Surface Vehicle to conduct surveillance, counter illegal fishing and identify hazardous oil, safeguarding marine life
Let's continue to "scratch" with PHPoC. Check out some basic tutorials in this Scratch programming with PHPoC.
Build an efficient perception pipeline using multiple sensor modalities to enable accurate pose estimation in an outdoor robot environment.
An autonomous UV Robot capable of traversing a room and disinfecting it.
This bot streams a video to YouTube from inside my turtle tank and allows users to move the camera around through commands in the live chat!
Line following robot car that changes the color line it follows based on a trigger shown in front of the car.
Use GPIO ports on a Raspberry Pi without technical knowledge using Node-RED.
PCB board for driving Tamiya Dual Motor Tractor Kit.
The explorer and mapper robot will be a robot with four wheels which will evolute in a room.
I made biped robot with M5 Atom S3. The basic concepts are: Simple and cheep as much as possible Cute and Cool
