Your plant has always been a pet. Now it can act like one.
This project is a fully automated smart terrarium system built using an ESP32. It monitors environmental conditions.
A smart, emotional companion that translates plant vitals into digital expressions using MicroPython and a custom PCB.
I got tired of forgetting to water my plants, so I built a Wi-Fi-enabled smart plant watering hub using a Raspberry Pi Pico W.
Will guide you to build a real time soil moisture system.
Soil moisture sensor reading relative moisture according to borders for high and low moisture which can be set by the user.
A potted cedar with a face, a pincer, senses, and a voice: a full AI agent on the Arduino UNO Q, held inside firmware-enforced limits.
Never let your plants die again! This smart irrigation system waters your plants automatically based on soil data and plant type.
An ESP32-based portable watering controller with scheduled watering, pump control, tank safety, MQTT status, and a browser-based setup
This system captures sunlight and redirects it to plants beside the garden wall.
Duke's Garden helps manage houseplants with AI-powered species detection, care prediction and guidance, disease diagnosis, & assistance.
This project uses IOT to automate plant watering so the plant will be watered when needed and continue to stay vibrant and healthy.
If you're too lazy (or busy) to water a plant yourself, I have just the device for you!
Over-engineered with Particle Photon 2 to automate precise misting and reservoir cycles. Tiered sensor array, OLED display, cloud publishing
Smart Houseplant watering system designed after the Fishtones from Eureekas Castle
Rooftop irrigation hub built for UNO Q’s dual-brain architecture. Uses AI capabilities combined with realtime weather forecasts and vision.
Build a smart irrigation system with micro:bit and Blynk to monitor soil moisture and control watering from your phone—anytime, anywhere.
This project measures the moisture content of the soil and sends a text to your phone if your plant needs to be watered!
In this tutorial, we will build a simple soil moisture indicator using an M5Stack ATOM Matrix, a capacitive soil moisture sensor & Visuino.
Made up with soil moisture sensor when the soil is too dry, the sensor detects it and the buzzer beeps
