Turn your head to drive a 6-axis Elephant Robotics myCobot 280 in real time using the built-in motion sensors inside Apple AirPods Pro.
Works out how much voltage a power rail loses across a KiCad board's real copper, vias included, and shows where.
Open-source robot OS for TonyPi: AI brains pick from whitelisted safe skills, falls get recovered, every run leaves a trace.
Build, flash, and debug STM32F407 firmware directly from Terminal using ARM GCC, OpenOCD, and GDB.
Relativty is an open-source project aimed to achieve VR democratization by the means of inexpensive hardware and abundant content.
We aim to bring proper heart care to developing countries. An early detection of these pathologies its vital for an effective treatment.
Go beyond the Arduino with this customizable Uno template. Take your prototypes to the next level!
A tutorial for how to assemble your OHS 2025 E-Textile Badge
This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).
An open-source GUI JavaScript OS for ESP32 with apps, graphics, hardware APIs, and an expanding ecosystem.
Send simple Bluetooth queries to control your MATRIX Voice's LEDs.
Nowadays a number of Peoples are roaming around the roads so I developed this automatic system to monitor them without human eye.
This is an autonomous Robot Arm that can play chess using image processing and machine vision.
The movements of connected colleagues translated into a living artwork - using Adafruit Feather Huzzah, servo motors, plywood and paint.
PedalSHIELD MEGA is an open-source Arduino MEGA programmable guitar pedal. You can create and share your own effects and guitar pedals.
GrumpyHedgehog allows you to communicate with signs and movements to send keyboard commands, turn lights on/off, count people in a room...
The Reflowduino is a completely open-source, Arduino-compatible wireless reflow oven controller packed with features!
Friend is an AI wearable device that records and summarises conversations, and gives you proactive feedback and advice.
hRobot is an open source, connected, 3D-printable robotic arm, powered by ROS, with 500g lift capacity.
The smallest NVIDIA Jetson dinosaur robot, open-source, fully 3D printable, based on ROS2 & Isaac ROS. Designed & made by Raffaello Bonghi
A two-in-one app with voice command, Arduino and NodeMCU with ESP8266 commanding Android app.
Turn a $15 ESP32 touch panel into a Home Assistant screen: drag-and-drop editor, no YAML, no MQTT. Free and open source.
Motion capture made yours.
A starting guide for users of RTL8720DN(BW16) dev board
