In This Tutorial i'm going to show you how to setup the serial communication between Arduino and NodeMCU for soil moisture monitoring.
A low cost network of weather and soil sensors streaming real time data to Microsoft Azure for analysis.
Use a Micropython Wemos to display time, atmospheric pressure, apparent temperature, and precipitation probability from Darksky API.
A Raspberry Pi RP2040 board with DVI interface and Ethernet. This project display adafruit IO dashboard and follow up any change.
Turns the 2 LED's on and off by calculating the distance of the object from the Ultrasonic Sensor.
An IoT project with Raspberry Pi 2 that uses a Thermistor as opposed to a dedicated temperature sensor to measure ambient temperature.
This is an easy way to do real-time monitoring with the DHT22/DHT11.
Design and build a system to monitor the status of your crops using the Netduino 3 WiFi.
Save water, save energy and monitor water consumption with a smart faucet.
Let's make a plant monitoring system with Moisture Sensor.
Get a text message with picture every time someone presses the doorbell.
Having problems sinking your birdie putts? Maybe your putter grip is on crooked! This project gives you a way to perfectly align your grip.
Send data to and fro among your devices and webpages without knowing the languages of the web, e.g., HTTP, JSON, XML, WebSockets, MQTT, etc.
Do you want to use the same system for online data logging as the SpaceX company? If so, this project will show you how to do it.
A simple array of a few Particle Argons to monitor and report environmental conditions of a mesh network of several spaces.
The Integration of Azure Sphere and Azure Cloud Services for Security-Oriented Internet of Things.
If properly adjusted according to the instructions, it is able to detect a small coin at a distance of 15 cm
Its is radar made by using ultrasonic sensor.
Project to Protect the Single Phase Induction Motor from faults like Over Voltage, Under Voltage, Over Current, Vibrations, Flame, Float.
Check internal connections RJ45 cable, standard cable, crossover cable, and special cables.
This project demonstrates how to stream samples from the ADC on the Zmod Digitizer into the DDR memory of the Eclypse Z7.
A smart light that responds to remote lighting conditions using Sensor Tag 2 and Raspberry Pi 2.
A very cool weather station with the help of ESP32, sensor DHT22, Nextion Display and measurements from openweathermap.org!
Open-ended home control with Amazon Echo, AWS IoT, Home☆Star and IOTDB.
