Implement seamless high-speed MIPI CSI-2 image sensor bridging and signal integrity using the Meticom MC20901 and FPGA.
Integrating a Galil controller and Keyence laser via Python to deliver real-time 3D topographical rendering and surface analysis.
ObdiiUartMkrShield is a socket board for Arduino MKR board to talk with vehicles through ODB-II interface.
An indoor air quality monitoring system for detecting toxic gases.
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
The device is able to turn a personal computer into a modern instrument for laboratory research.
Using Rasberry Pi 2, Azure, and Voice Assistance (Windows and Android) observe how your home not only gets automated, but also self aware.
Operate inaccessible and remote devices using a smart glove from anywhere on Earth.
A novel design of an industrial DIN rail Power over Ethernet (PoE) to Serial device was developed based on WIZ750SR with SCADA integration.
Monitoring 100 year old factory processes are hard, but it gets easier, safer and more reliable with a network of nRF24L01 RF transmitters.
Temperature monitoring system and anomalie Detection using an LM35 + Bolt IoT to keep the tablet in the case of the pharmaceutical companie.
Buto is my 'real steel' robot project. Now, BuTO has been connected to the Internet and can be controlled remotely.
Measure the flow rate through a pipe and use machine learning to determine if a clog has formed.
4 ea. 4-20mA IN/OUT, 4 ea 0-10V IN/OUT, 4 ea. Opto-isolated IN/OUT, 4 ea 250V/10A relays, RS485, CAN, 1Wire. All for $50.
120/240V AC or 30V DC power supply module for the Sony Spresense Expansion Board. Plug and power your projects for real world.
Get up and running with this kit, based on Qualcomm's powerful edge AI processor QCS6490
The thingSoC ESP32S is an open source hardware project for the ESP32S, a radio module from Espressif.
Automatic FOMO-based objects counting using computer vision and a web app.
This project guides you through the process of creating an IoT gateway using Eclipse Kura project and Orange Pi boards.
World’s First Wall Engraving/Milling CNC Machine that works on the vertical surface without any X-Axis Limits.
I am going to explain how I implemented Industrial Automation based on Node-RED and Raspberry pi using Node-RED Dashboard.
Sensing, Connected Utility Transport Taxi for Level Environments (SCUTTLE) - a fully open source mobile robot platform.
An Android things based PLC controller for Industrial IOT application
An industrial automation system for block sorting, utilizing Computer Vision and Finite State Machines, implemented with Edge Impulse.
