The. NET nanoFramework runs on RAK WisBlock ESP32 modules. There are I2C and Serial WisBlock sensors how hard would it be to make them work?
I built a gesture sensor that works through solid objects—no exposed optics needed. Huge upgrade for my project!
You have two sensors, having the same I2C address, which you want to connect to your Nucleo board using separate I2C buses for each sensor.
Make a useful diagnostic tool with a microbit board and a bit of code
This project is a 24-bit digital IO expander module, using the Texas Instruments TCA6424A circuit utilizing I2C.
This is a DC Motor Driver that is controlled via I2C. The I2C Address can be set in the range: 1 to 127. It can read a Quadratic encoder.
Web-based CH552 gyro viewer with real-time visualization via WebSerial, adapted from open-source USB firmware and Processing.
Some modules are offered as I2C, but actually they are not really I2C. The most simple multiplexer ever.
Learn how to get temperature and atmospheric pressure values from the BMP280 using the Raspberry Pi Pico in Micropython.
Create a low power tool which will monitor the quality of air. Identify different gases present in air and save data to server.
Some microcontrollers have 2 I2C buses. This scanner scans bus-0 and bus-1 and shows the results on the LED matrix of the new UNO R4-WiFi.
Use Python on BeaglePlay to use Qwiic Capacitive Touch Slider and print the output.
This project explores temperature compensation and calibration for devices such as sensors, thermometers, and more.
Midbar is my attempt to learn from the mistakes made by others (and later from my own mistakes) to make a better password vault.
Another expander peripheral for my ESP-12E I2C Base Card
Check out a simple hardware implementation of a 4-Mux LCD driver using time division multiplexing techniques along with system monitoring
Using IO to simulate I2C based on APM32E103.
Put together a food drive box that weighs, tracks and encourages people to support those in need.
8 channel qwiic compatible high frequency encoder reader
Using a I2C connection port to an lcd!
This project presents how to program a compact yet capable Li-Ion battery charger.
A smart watch that toggles between a regular clock mode and data about steps taken and the current temperature and humidity.
