An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display.
A rather convenient device to monitor heart rate while running.
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
MAX86150 puts ECG and SPO2 on a single chip, opening new opportunities for calculation of pulse transit time and indirect blood pressure.
Using a pulse sensor + Arduino + Bolt IoT Platform, build your own pulse monitoring system which notifies you when abnormality is detected.
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
An IoT enabled solution to monitor patient health and inform relatives in case of emergency.
This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.
The background of this project is to monitoring human body heart rate and send an alert to email when heart rate above normal condition.
Low cost smart vitals wearable which can help in early detection of COVID-19 in front line workers
Getting some information from human body by using simple sensors and Arduino.
Hello again! Today I made a example for the KY-039 heart beat sensor.
A cost-effective and open source system to data log health measurements in Google sheets and allows the doctor to monitor them from anywhere
Measure your heart rate wirelessly using ESP32 dev boards and AI.
ProtoCentral's Christmas tree tracks your pulse with a pulse -oximeter and glows in sync with your heart rythm. Here is how we made it.
How to Make Heart Rate & Blood Oxygen Detection with MAX30102 Pulse Oximeter using Arduino
Heart beat monitoring system using Arduino that will detect the heart beat using the DFRobot's heart rate sensor.
I've invited fellow writers and now one book is missing. Time to make a lie detector with Arduino Nano.
In this project, you will learn to make IoT based Pulse Oximeter using NodeMCU ESP8266, MAX30100, and Blynk Application.
A wearable low-powered device detects falls using machine learning at the edge. It also monitors the heart rate.
"Monitor pulse rate in real-time using Arduino, Pulse Sensor, and 16x2 LCD display for an easy, accurate BPM reading. "
This is a mini heart rate monitor that we made using Arduino and a pulse rate sensor.
A easy DIY project for school and college, Which can measure BPM and oxygen level very accurately.
Bring some Cyberpunk to life and some Keanu to your ears. Arasaka would be proud.
