Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level. Display on Nextion display or Nokia LCD
In this project, we built a simple Soil Moisture Analog Gauge using the MakerBuddy IoT Kit, a soil moisture sensor, and an SG90 servo motor.
A non-invasive reader for heating oil tank gauges, based on Raspberry Pi, OpenCV, and Home Assistant.
Watch your favourite crypto coinpairs in a nice chartwindow, shows min/max price, custom timeframes etc (pair must be listed on Binance.com)
An R/C servo can be used to make a gauge to measure the intensity of light.
By the end of this tutorial, you will be able to make your own simple temperature gauge using micro:bit.
Program an Arduino to operate an X27-589 stepper motor using the XOD visual programming language.
Gauge type graphical application to demonstrate the value of an analog reading.
Two analog voltage meters, ATtiny85s and some parts from a modern bike computer turned into speed and cadence gauges for a hipster's bicycle
A clip-on electronic depth gauge for a Dremel Drill Press. No wires or screws required.
Control an analog gauge using an MSP430 and some simple logic.
In this Tutorial we are going to make a Battery Level Indicator using LCD I2C 20 X 4 Display.
In this tutorial we will learn how to make a Volume or Speed analog meter using the OLED display and Arduino. Watch the Video
This tutorial shows how to use the INA226 Voltmeter with a GC9A01 Display in Visuino to measure and display voltage in real time.
A Multisim simulation of a circuit of a Wheatstone bridge with 4 strain gages, with voltage bias vesus temperature with NTC Thermistor
In this tutorial we will make a simple Volume Indicator using GC9A01 SPI Display, rotary encoder, Arduino and Visuino program.
Build an interactive analog temperature gauge using the MakerBuddy IoT Kit, a DS18B20 temperature probe and an SG90 servo motor.
