A small shield for Arduino nano to make the connections possible on breadboard without extra wires. Having onboard power section.
It is time to start with a real-time operating system designed for IoT, in this practice you will learn how to use it with a BastWAN.
I made this Arduino to make it compatible with all the sensors, modules and screen. With dual headers a lot of jumpers connected easily.
13.7x more power than its predecessor. Discover the CanMV K230—a 6TOPS RISC-V powerhouse designed for multimodal AI and edge computer vision
I designed two custom PCBs based on the unique features of the PICO DEV M3 development board.
This is a cost-effective single-board computer. For engineers with experience in embedded SBC development, it's an invaluable tool.
Your plants die when you are on the road, this practice will help you create a Wifi monitor to keep an eye on them.
The development process of building Eclipse to develop APM32F4
With this simple tutorial you transform your Agrumino Lemon into a nice infrared and no touch thermometer.
FpgacapZero is a suite of open-source, vendor-agnostic FPGA debug cores. This project added support for it to the BRS-100-GW1NR9.
A review of the Maker Uno from Cytron Technologies.
Video walk-through demonstration of using the evaluation DEEPCRAFT™ Ready Models that are available within ModusToolbox™ Software.
The USB I2C/SPI Master Adapter was born from a simple need create a versatile, affordable, and easy-to-use tool.
PCB Board to adjust an antenna to determine the gain and the transmitting range of radio controllers.
Connect to a Waveshare 2.9-inch e-Paper module to display some texts
Exploring digital designs with the Logic Gate Evaluation Board
Unboxing and Testing the Youyeetoo X1, an X86 Architecture Development Board
Determination of the nature of accidents on power lines using machine learning.
X1 SBC. This board is highly capable and comes with a rich set of peripheral resources.
Run Edge Impulse models on the MaaXBoard and see how well they perform compared to other Machine learning models!
Get started with embedded systems using RT-Thread RT-Spark board basics, STM32CubeIDE & CubeMX with a simple basic Blinking LED project.
I am going to show you how to make all the basic configurations when you want to use the DA14535 Renesas BLE IC into Peripheral role.
Elevating your PIC development skills using devices with more I/O peripherals and extensibility.
Imagine if you took the arduino Leonardo and put I2C chips on it tot test your communication skills. With lipo charge and Boost converter.
