The WAVEbuoy is a arduino lamp connected to the internet that displays the current wave height of any of the NDCBs network of wavebuoys
Easy to make educational kids automatic detection "analog" clock for making hand washing as fun as possible
Use an ESP-01 Relay board to sync with NTP and generate the sync signals to sync an old industrial "slave" clock.
How to Make MP2.5 & Co2 Detect Wall Clock for Indoor using Arduino, MG811, GP2Y1014AU Sensor
My research project on microcontrollers, using a Arduino UNO R3 and other components.
With a few lines of code you can have a digital analog clock on a TFT display.
Four digit clock made up of 30 WS2811 addressable LEDs (Clock, alarms, temperature, humidity, atmospheric pressure, and remote monitoring)
A mechanical clock which stretches a flexible elastic to form the digits
This project uses an ultrasonic sensor to allow a "hand wave" (no touch!) to trigger a series of LED's and the Happy Birthday song twice
Clock to activate and de-activate a regular telephone wall connection to allow telephone calls only during selected hours.
A segmented clock design based on a strip of addressable LEDs.
The Arduino high-precision digital clock is a multi-module DIY combination that uses the Most Complete UNO Starter Kit.
A simple, yet elegant Verilog-based FIFO design with detailed design steps, you should know!
Community-based solution for a municipal problem.
This clock has a big display for time, temperature and the date in a loop.
This is used as a clock accuracy check by triggering the minute or hour hands.
An Arduino-based alarm clock with a 3D printed casing.
A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds.
A unique and stylish timekeeping ornamental use for the Arduino.
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
Get all the information that you want from the GPS on a Nextion display. With the TinyGPS++ and with out the Nextion library.
Use Meadow.Foundation to quickly and easily wire up a LCD screen and to make a Christmas countdown display.
In this tutorial we will learn how to make a Countdown Timer, you can set time When timer reaches the zero the Relay will trigger the light.
