Lapsed Time Timer

//************************************************************
//                     Lapsed Time Timer                    //
//                By Robert Leney  January 2017             //
//************************************************************
//
//    Reads an input on Trigger Pin. This starts the lapsed
//    time timer. On the going low of Trigger Pin the lapsed
//    time is logged. The minimum time that can be measured 
//    is 1 minute as the trigger is inhibited for this time.
//
//***********************************************************
//   
//    Uses 16x2 LCD display. LCD pins need changing to suit
//    your setup.
//
//***********************************************************
#include <stdio.h>
#include <LiquidCrystal.h>

// LCD Initalisation ...............................
LiquidCrystal lcd(8, 13, 9, 4, 5, 6, 7);
//..................................................

//Array Constants
enum Mode { Days, Hrs, Mins, Secs};


// Time constant
const int second = 1000;
 
// Assign Trigger input pin
const int Trigger = 3;


void setup() {
// Setup LCD Display .........................

  lcd.begin(16, 2);
  lcd.clear();
  lcd.setCursor(0,0);
//...........................................

// Initalise input
pinMode( Trigger, INPUT);
}

void loop() {
// Timer ...............................................  
  bool Tripped = false; 
  
  // Initalised here to expand scope
       int secs  = 0;
       int mins  = 0;
       int hours = 0;
       int days  = 0;
  //...............................
   
  Serial.println("STARTED ");
  lcd.print("STARTED ");  
    for (days=0; days < 7; ++days){    
       for (hours=0; hours < 23; ++hours){
          for (mins=0; mins <59; ++mins){
            for (secs=0; secs < 59; ++secs){
                  // Counting Output
                  lcd.setCursor(0,1);
                  lcd.print("H ");  
                  lcd.print(hours);           
                  lcd.print(":M ");        
                  lcd.print(mins);  
                  lcd.print(":S "); 
                  lcd.print(secs);
                  lcd.print(" "); 
                  
              
                  if(digitalRead(Trigger) == LOW && Tripped == false){ 
                    Tripped = true;   // Inhibit Log for 1 minute
                      //Logged Output
                      lcd.clear();
                      lcd.setCursor(0,0);
                      lcd.print("H ");  
                      lcd.print(hours);           
                      lcd.print(":M ");        
                      
                      lcd.print(mins);  
                      lcd.print(":S "); 
                      lcd.print(secs); 
                      days=0;     
                      hours=0;
                      mins=0;
                      secs=0;
                  }
                 delay(second);                    //delay 1 second
           }
           Tripped = false;
        }
        
    }
  }
  //End Timer ..............................................................
}