Miss out on building your badge at Open Sauce? Design your own!
A 3D printed birthday cake with LEDs that handle the sequence with analog electronics through an NE555 and an CD4017.
Learn how to assemble your Avnet electronic casino chip badge and how it was made on Fusion Electronics. This project will give you the win!
Wireless light festival LED badges that automatically fall into sync—no pairing, no controller.
In this tutorial, we will build a scrolling text display using FC-16 LED matrix modules (MAX7219-based), an Arduino, and Visuino.
In this Visual Programming Visuino tutorial, we’ll use the Adafruit NeoPixel NeoMatrix 8x8 64 RGB LED Matrix to create random color running
In this tutorial, we will build a web-controlled NeoPixel LED ring using an Arduino Nano ESP32 and a WS2812B NeoPixel LED ring.
A low-height, low-profile subwoofer enclosure designed to retain full trunk usability, enhanced with music-reactive edge-lit acrylic.
In this tutorial, you will build a touch-controlled dimmable light using a 5V retro light bulb module, a capacitive touch sensor.
Get started with embedded systems using RT-Thread RT-Spark board basics, STM32CubeIDE & CubeMX with a simple basic Blinking LED project.
A natural wreath with dusk-dawn lights, aka, a tiny, self‑powered, dual‑channel LED system
In this tutorial, you will learn how to make a decorative ambient lighting setup using 4 dimmable 5V retro light modules and an Arduino.
A Matrix-raining, acrylic-stacked, CTF-unlocking badge built for Bug Bounty Village - and the six-layer PCB saga behind getting it to glow.
Exploring ARM Cortex-M4 assembly execution and debugging using the STM32F407 RT-Spark board.
Back in the early times of cinema, moviegoers had to suffer from low frame rates. What is the minimum frame rate to overcome this problem?
What I learned Today? Used 555 IC, LED, 330, 47k, 10k resistor and 47uf, 0.01uf capacitor and 9v battery for a flash blinker 1st project.
