Using Webhook to Slack team chat application and sending direct messages to your PC/Mac/notebook or any Mobile device.
Motion Activated Alarm System!
Wake up to hearing the daily weather report, what traffic will be like, your favorite music, or the mornings top headlines.
An Arduino-based alarm clock with a 3D printed casing.
Hello world! Today I made an example on the KY_019 Relay module. In my video I use an alarm with a strobe attached to it.
How to make Home Security system by using PIR sensor and DF player mini for audio integration
Consists of an alarm that warns when the presence of a person is detected on a house entrance or room. It is based on Arduino modules.
When you tap/move the motherboard 2 LED's go off in a siren!
Protect your bike from thefts with an alarm. you can do it.
An alarm clock that actually wakes you up.
Turn your hotel room pillow into a cloud-shaped lamp—or even a gentle, light-based wake-up alarm.
This is an alarm system based on the MKR1000 and a raspberry pi 2 or 3. The system will detect different alarms and notify you if necessary.
MEGR3171 Introduction to Instrumentation - Fall 2017 @UNC Charlotte / 2017 Fall IOT Project
Temperature Alarm that will beep and flash when the temperature is out of out of boundaries. Watch the Video!
A smart & portable motorbike/scooter/anything alarm & notifications system. It makes sure no one messes with your bike - even without WiFi!
An Arduino-powered Smart Helmet that detects crashes and tracks location in real-time, providing instant alerts to improve rider safety.
Pico project that provides a quick alarm response to the people in the particular zone when a fire source or flame is detected.
Can't afford an expensive security system, but still want to protect your home? This simple alarm is all you need to scare off any intruder!
Set an alarm when it's too hot, or detects motion, or detects an obstacle.
Tiny DIY bike alarm: vibration triggers buzzer, Hall sensor stops alarm only with magnet — compact, low-power anti-theft gadget
With its simple design, low cost, and easy setup, this STM32 alarm clock is a perfect DIY project for beginners and electronics enthusiasts
Hook a PIR motion detector to a GPIO pin on a Raspberry Pi and create a virtual connection to a Twitter Node in NodeCode.
An alarm clock with a separate speaker forcing you to get out of bed to turn it off!
Save yourself from fire with home made fire security system using Bolt IoT!!!
