Powered by MicroPython on PSoC6, this fancy alarm clock uses NeoPixel lights to help you start your day with full energy!
In this tutorial you will see how to make a 10s Countdown Timer using the ATOM Matrix ESP32. Time can be adjusted in the project.
Is a smart clock that is designed to alert an individual or group of individuals at a specified time. Using Boltiot and integromat
We wake up in the morning by using alarm but they were continuously ringing to overcome this we created a alarm using bolt iot
An alarm clock that can be snoozed remotely via detection from an IR motion sensor and can report the weather by using a solar panel.
Creativity has no limits, so the Wokwi Arduino Simulator. In this project, you will see how 30 LCDs together become one simple clock
Making a Alarm clock with Bolt Iot WiFi Module and Itegromat.
An alarm clock with random questions. It will stop making noise if the answer is correct; if the answer is incorrect, it will keep annoying
The Wakeup-Inator is a system that serves as a manual alarm and the ultimate accountability partner that will ensure no man is left behind.
A smart programmable clock and led matrix display using the SURF5 board for your office, gym or home.
A physical tomato clock that tracks focus sessions and emails your daily attention report. Built with Particle P2 and Tachyon
An Alexa activated alarm clock that when it goes off, LEDs with strobe until the alarm is turned off.
This tutorial shows how to use the DS1307 Real-Time Clock (RTC) with a GC9A01 Display in Visuino to keep and display accurate time.
A handy alarm clock, that slowly brightens lights, and runs a fan or a heater to get the room to a comfortable temperature when you wake up.
