Give Claude Code a short spec; it picks the parts, draws the schematic and routes a 281-part 6-layer PCB with zero ERC/DRC errors.
A practical tutorial showing how to enable real-time internal ADC-to-DAC digital loopback on the ADRV9009 using ZCU102.
Learn how to build a simple signal generator capable of producing sine, square, and triangle waves.
Read analog signals from the Arty Z7 XADC directly in LabVIEW through a custom FPGA interface for real-time data acquisition.
A small range Volt-Meter with good accuracy, all done with a very minimal setup.
A simple RT-spark-based voltage monitoring system was developed to measure battery and USB voltages using the ADC.
Monitoring a CR1220 coin cell and USB voltage on the RT-Spark board using an STM32 ADC, voltage divider, and noise filter.
How Temperature sensors work
