Hardware and Software products

The OpenLogger Screw Terminal Adapter is intended to be used with the Digilent OpenLogger to provide external connections to the OpenLogger.

The Digilent Orbit BoosterPack is an add-on board for the Texas Instruments Tiva C Series LaunchPad microcontroller evaluation kit.

A robot controller to operate different robots, from different vendors.

Everything you need pre-installed on the device - just plug in via USB and start writing JavaScript code immediately!

AM3703-based Gumstix computer-on-module with TI's WiLink 8 Bluetooth 4.1 + BLE and 802.11b/g/n wireless comms with Access Point mode.

An economical oxidation-reduction potential (ORP) measuring module that is ideal for mass production.

PaPiRus is an ePaper / eInk screen HAT module for the Raspberry Pi with screens ranging from 1.44″ to 2.7″ in size.

PaPiRus is an ePaper / eInk screen HAT module for the Raspberry Pi with screens ranging from 1.44″ to 2.7″ in size.

The PaPiRus Zero case is the perfect enclosure solution for the PaPiRus Zero,

PaPiRus Zero is an ePaper screen pHAT module designed specifically for the Raspberry Pi Zero with a screen size of 1.44″.

PaPiRus Zero is an ePaper screen pHAT module designed specifically for the Raspberry Pi Zero with a screen size of 1.44″.

Dual AA Battery Power Pack

Coin Battery Power Pack

Pretty Good Cheap Power Supply Unit = PGSPSU

An economical pH measuring module that is ideal for mass production.

Intelligent control unit for all Zigbee wireless light controls (vendor-independent), Phoscon App for desktop and mobiles devices integrated

4-Port Digital Input Board is a PHPoC smart expansion board for WET Contact or Dry Contact.

Analog Input Board is a PHPoC expansion board for the analog input of 0~5V or 0~20mA.

Analog Input Board is a PHPoC expansion board for the analog input of 0~5V or 0~20mA.

PBH-101 is equipped with four serial interface to connect and communicate with sensors or equipment which supports RS232, RS422, or RS485.

easy to configure the circuit with soldering

RS422/485 Board (S-type) is a PHPoC expansion board for RS422 or RS485 communications.

RS422/485 Board (T-type) is a PHPoC expansion board for RS422 or RS485 communications.

subwoofer out

Unlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!

Protect your lovely 7" Raspberry Pi Touchscreen with this lovely display frame!

The PIC18F47K42 MCU can be found at the heart of a wide range of products, including safety-critical and IoT devices.

The PIC24F Curiosity Development Board (Part Number: DM240004) is a low-cost platform with an integrated programmer and debugger and easy...

PIC64GX1000 MPU with four 64-bit RISC-V cores

The PICO-IMX6 reference design based on the NXP i.MX6 multimedia processor is a purpose-built, small footprint hardware platform equipped...

The PICO-IMX6POP reference design based on the NXP i.MX6 Package-on-Package (PoP) multimedia processor together with the NXP MF0100 Power...

The PICO-IMX6UL-EMMC design based on the NXP i.MX6 multimedia processor is a purpose-built, small footprint hardware platform compatible ...

The PICO-IMX6UL-NAND design based on the NXP i.MX6UL application processor is a purpose-built, small footprint hardware platform compatib...

The PICO-IMX6UL-NOR design based on the NXP i.MX6UL application processor is a purpose-built, small footprint hardware platform compatibl...

The PICO-PI reference design is compatible with Intel Edison and TechNexion Pico modules and add a variety of sensors and connectivity to...

The PicoZed™ Carrier Card V1 supports development of PicoZed-based designs with a platform containing all the necessary interfaces and I/...

The Smart Vision Development Kit builds on the PicoZed™ SOM by providing a carrier card for machine vision applications. This kit provide...

Pi Cubes UO4 Module is providing four universal outputs.

pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels

Mobile and Internet of Things hardware device for software developers The Round Solutions PingPong is a modular IoT Hardware Platform.

The Pi PoE Switch HAT Case is the perfect enclosure for our Power over Ethernet Raspberry Pi HAT.

pisound is an ultra-low latency high-quality soundcard and MIDI interface specially designed for Raspberry Pi pocket computers.

The Pi Supply Switch is the solution to all of your Raspberry Pi power management problems.

The PIXI-41Z module is ultra-compact, low power high sensitivity module and supports Bluetooth 4.2, 802.15.4 and Thread communication.Ava...

A great bundle of things you need to get up and running with the new Pi Zero W!

Access serial ports over Ethernet!

Enables you to easily access serial devices located on a remote NetBurner device

3.7v LiPo Battery Power Supply Solar (MCP73831, PAM2305 & XC9141)

2G/3G Cellular to Cloud Pack with STM32L496AG MCU

A turnkey development platform for cellular and cloud technology based solutions

These connectors will help build the various shape of Aluminium-Profile frames.

These connectors will help build the various shape of Aluminium-Profile frames.

These connectors will help build the various shape of Aluminium-Profile frames.

PLC is a Base for an industrial application.

Developers can now easily build connected products without worrying about power management, batteries, or networking.

PLUS is a enhanced module including battery, gear potentiometer, IR transmitter, PORT B(GPIO Port), PORT C(UART Port) and MicroPhone Pad.

The Pmod 8LD has eight high-brightness LEDs that are driven by logic level transistors.

With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent.

With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmods offered by Digilent.

The Pmod AMP2 is a low power audio amplifier through the use of the Analog Devices SSM2377.