Hardware and Software products

With this Seeeduino Mega protoshield, users will find a large prototyping area.

if you are going to make an outdoor data-logging application, you will find that Seeeduino Stalker is the best board.

Seeeduino Stalker V3 enclosure is used for Seeeduino Stalker v3, It's waterproof and enough strength, Can carry Seeeduino Stalker v3 environ

Designed specifically for beginners,includes the necessary parts for LoRaWAN.

SenseCAP M2 is a LoRaWAN Gateway connected to the Helium LongFi Network and able to provide miles of wireless network coverage and data tran

The SensorBeetle adds sensors for humidity, temperature, acceleration, magentic field and rotation.

These Serrated Flanged Nuts have a nice flange as well as a serrated face to grab hold and stay connected to your Plates.

VOC & eCO2(CCS811) sensor

Particle Sensor (MAX30105)

Capacitive Touch (CAP1296)

The easiest and fastest way to add LTE connectivity

IMU 6DoF (MAG3110 & MMA8653fc)

Signal R2, a thrust vectoring kit, is here to bridge that gap

SIMCom WCDMA/HSPA Module + GNSS

SIM808 GPS/GPRS/GSM Arduino Shield is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino shield.

Compact and more affordable Sisyphus kinetic art table.

Sitara™ AM57x Processors: Cortex-A15 + DSP processors with accelerated multimedia and industrial communication

Sitara Processor: Quad ARM Cortex-A15

This PCB includes the licence for the standard version of Embedded AggreGate (up to 100 external tags).

This PCB includes the licence for the standard version of Embedded AggreGate (up to 200 external tags).

Size 3 Linux Tibbo Project PCB

Size 3 Linux Tibbo Project PCB

Size 3 Linux Tibbo Project PCB

Use this 3D interface to sense things floating in the air over it. Detect swipes and the motion of your hand with X, Y and Z positions.

Infrared Temperature Sensor(MLX90614)

Infrared 16x4 Temperature Array (MLX90621)

Smart RS422/RS485 Board is a Smart Expansion Board for PHPoC Shield. It is designed to help Arduino communicate with RS422/RS485 devices.

GNSS (GPS)

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy ...

The new Snapdragon 820E platform provides the kind of computing power that you would expect from modern smartphones.

A standalone PCB to build a handheld computer around a Raspberry Pi Zero W.

The Snips Maker Kit is infinitely hackable, open source, and Private by Design.

Create a fully secure cellular data connection between devices and your on-premises or cloud-based systems

Junction supports inspection, mirroring, and redirection of packets passing through a Virtual Private Gateway (VPG)

Secure device certificate provisioning service to securely initialize your IoT devices for cloud connectivity

Female Crimp-on Spade terminal for use with our Micro Limit Switch.

The Ardumoto Shield is a dual-motor controller for Arduino

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The BlueSMiRF is the latest Bluetooth****wireless serial cable replacement from SparkFun Electronics!

The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options t

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board ma...

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System.

The HIH6130 is a digital output-type relative humidity (RH) and temperature sensor combined in the same package.

The SparkFun Inventor’s Kit for the Genuino 101® board is a great way to get started with programming and hardware interaction with embed...

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware with the Arduino programming language.

The SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, one in center

The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions.

The SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position.

The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform

The SparkFun NEO-M9N GNSS Function Board is a high quality, geospatial board with equally impressive configuration options.

The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals st...

The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices

This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have o...

Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about ev...

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface

The SparkFun SparkPunk Sequencer is a musical control voltage sequencer designed to control the SparkPunk Sound Kit.

The SparkFun 16-Pin SSOP to DIP Adapter is a small PCB that lets you adapt SSOP packages into a DIP footprint. These small boards are use...

The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board.

The THAT 1646 OutSmarts Breakout Board offers an easy solution to adding a balanced audio output to your circuits