Hardware and Software products

SensorTile development kit.

The 3.6's sibling, less beefy (and a bit more affordable) – but still a powerhouse for music and USB controller applications.

The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That’s right, now you can s...

The VRM (Voltage Regulator Module) is a battery-friendly, switching voltage regulator capable of providing 6A of current at 5V or 3.3V.

Easily connect, monitor & control devices, transform real-time data into insights & combine devices & services into a complete IoT solution.

Get started with your MIPI design with the best - in- class performance and flexibility of the AMD Spartan™ 7 FPGA device.

Arty is a ready-to-use development platform designed around the Artix-7 FPGA from Xilinx.

Arty is a ready-to-use development platform designed around the Artix-7 Field Programmable Gate Array (FPGA) from Xilinx

H07R30 is an audio amplifier and speaker module based on ST TS4990 1.2W audio amplifier and STM32F0 MCU

Gboard Pro 800 is a unique Arduino mainboard

Turn your Samsung smartphone into a portable next-generation virtual reality system.

The gen4 3.2” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

It is used for making motion detecting applications such as alarm burglar systems, visitor presence monitoring, light switches and robots.

Particle Interface 1 channel 10 amp relay controller with 7 additional GPIOs.

16 useful JST jumpers (2-pin, 4-pin, 6-pin) for hooking the Blue to motors, encoders, UART, I2C, CAN, PWR, SPI, GPS, GPIO, & ADC.

A Motor Driver Modulo which can power two DC motors, a stepper motor, or four single ended devices (ie, solenoids).

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface

nio blocks allow you to design and assemble atomic distributed systems

The nio™ software platform enables rapid development of extensible, secure, and scalable IoT solutions

The PIC18F product family also has an 8-bit CPU and offers extended performance over the PIC16F device family. The PIC18F device family c...

The Snapper Robot Arm is a perfect entry level kit for getting started with Arduino and robotics.

Connect your Arduino project to the SmartThings platform with this Shield and use it as a base for your next DIY home automation project.

Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.

This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, et...

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and...

Connect all your things to this simple Brazilian IoT Platform!

The T-SKIN is a natural extension of your hand. It is not a glove or bracelet, but a tiny device compatible to Arduino SDK

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS

15.6" Touch LCD for QUAD/DUAL - LVDS connection

Specifications Output Power: Min 2

This is a 7 HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it.

Trinket is a tiny microcontroller board, built around the Atmel ATtiny85

This Arduino shield comes equipped with WiFI, NFC, EEPROM, and an LCD screen!

Intuitive graphical programmer for AVR and SAM devices.

Avnet Things connects sensor platforms into a central dashboard, providing access to leading technologies through a simple user interface.

Amazon Relational Database Service (Amazon RDS) makes it easy to set up, operate, and scale a relational database in the cloud.

A complete system for developing AI and ML solutions with the convenience and expandability of the BeagleBone platform.

Connect your devices with an easy to use dashboard. It's easy and fast. Works wether you are local or remote.

Get started with the Notecard and Raspberry Pi with this combination kit. Includes a Notecarrier-PI, Notecard, and a cellular antenna.

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality.

With 140 wires of various lengths and colors at your disposal, any project you create can be completely neat and orderly!

A flying open development platform

Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc

Kit include Servos Horns x4 & Screw x3

Create stand-alone Internet-enabled devices in minutes with the built-in web IDE

gen4 4.3" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

the DS18B20 arduino Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability.

The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30.

Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume over 85 dB and is integrated with Grove interface.

Cellular microcontroller used to accelerate your engineering. The Dash allows you to create a new connected device in minutes.

Devices with Husarnet Client installed communicate with each other directly. After discovery phase the traffic goes P2P over the internet.

Integrate hand/finger tracking, facial analysis, speech recognition, augmented reality, background segmentation, and more into your apps.

The LightBlue Bean+ is a Bluetooth Arduino for the mobile age. Features Grove connectors, addon boards and a rechargeable battery.

It's compatible with Leaf Maple. But It's a mini version. It only need 9$. And It supports Arduino IDE. It's cool to program it with Arduino

The unlimited versatility of the LEGO system, with an intelligent microcomputer brick and intuitive drag-and-drop programming software.

The System Designer is a web-based tool that enables you to build distributed systems of machines and devices without writing any code.

An open-source single-board computer built upon the 96Boards IoT Edition specification

PHPoC Debugger is a software used for development and management of PHPoC Products. It is requried to install this program before using PHPo

Start your Android Things Project today with the PICO-PI-IMX6UL based around the NXP i.MX6UL.Included in the pack is a USB Type-C cable f...

Programmable Wireless delivers IoT connectivity that scales to the enterprise, and serves developers all over the world.