Hardware and Software products

Control anything with a push!

The popular desktop laser cutter.

GPS is a module built in small GPS module. The small GPS module named UBLOX NEO-M8N.

This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm.

More cost-effective monochrome backlight derivative for you.

This is a new generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air.

This module is a bi-directional SPSD(single-pole, single-throw), normally open solid state relay(SSR). 

Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light.

Connect any sensor the Helium network using the Helium Atom Xbee Module Xbee and your hardware platform of choice.

CC1310 LaunchPad

CC2650 LaunchPad

HEART is a unit integrated MAX30100(pulse oximeter chip).

The world's smallest 6 DOF robot arm. Based on Raspberry Pi.

Fibocom NL668-LA series is a series of LTE Cat 4 products for Latin America.

Grove expansion board has up to 25 grove interface units with option to switch between 3.3V and 5V power supply

The Pmod BT2 is a powerful peripheral module employing the Roving Networks RN-42 to create a fully integrated Bluetooth interface.

Build unique phone call experiences with one API to make, receive, control, and monitor calls around the globe.

The PYNQ-Z1 board is a general purpose, programmable platform for embedded systems.

Our maker friendly Arduino dev kit has a LiPo battery charger, monitor, & two RGB LEDs built in for $25 & is smaller than two US quarters

Next-generation virtual reality

DK2 is the latest development kit for the Rift that allows developers to build amazing games and experiences.

Prevent small leaks from becoming costly disasters with this ZigBee device by getting instant alerts on your smartphone when moisture is det

The kit includes a Wio Terminal master controller with WIFI/BLE and display, as well as carefully selected Grove - LoRa-E5, Grove - VOC and

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Rin...

A Wi-Fi client and access point to embed into your projects!

The TinyFPGA BX is a small FPGA module with all of the components and circuitry required for the FPGA to function taken care of for you

The UltraZed-EG™ Starter Kit consists of the UltraZed-EG System-on-Module (SOM) and IO Carrier Card bundled to provide a complete system.

UP 4000 is the next generation credit card sized successor to our UP Boards series.

Standard USB A to micro-B cable, measuring nearly 5ft in length.

W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500

3.3K OHM 1/4W 1% METAL FILM RESISTOR ROYAL OHM TOP QUALITY

A 5-megapixel camera module for UDOO, sensitive to infrared light (no IR filter).

A Hex inverter has many uses. Essentially they are logically NOT Gates.

The 9DOF Razor IMU incorporates three sensors - an ITG-3200 (MEMS triple-axis gyro), ADXL345 (triple-axis accelerometer), and HMC5883L (t...

myCobot/myPalletizer- Adaptive Gripper

Here is our ADS1292R Arduino shield that will let you read ECG and respiration data using Processing in real time!

A framework that makes it easy to write applications that discover—and communicate directly with—nearby devices.

An open source operating system for connected IoT devices that use 32-bit micro controllers of various architectures. Includes full BLE 4.2!

Hardware add-on to the Arduino Portenta H7.

The Arduino USB Host Shield allows you to connect an USB device to your Arduino.

AT&T M2X is a highly secure and scalable time-series data storage for network connected devices.

Works with OpenBuilds V Wheels! These are the same bearings that are included with the OpenBuilds V Wheel Kits.

The Base Board is the host of multiple hardware combination of Shields defined for the IoT application hardware implementation.

Get started with the Notecard and the Feather with this kit. Includes a Notecarrier-AF, a Adafruit Feather ESP32, and a cellular Notecard.

H23R10 is a Bluetooth/BLE module based on Laird BT900 and STM32F0 MCU

This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connecti...

The third board in the Circuit Playground series, now with nRF52840 microcontroller as main chip and Blutooth Low Energy support.

A low-cost hardware platform that enables design and debug of the PSoC 4700S MCU.

H04R20 is a compact coin-cell lithium battery holder that fits two CR2032 batteries in series

Multicolored Dupont Wire

Different size wire: 4.72 inch,6.29 inch,7.87 inch,9.84 inch,many kinds of colors and sizes can do all kinds of circuit experiments.

with UNO R3, Line Tracking Module, Ultrasonic Sensor, Bluetooth Module

The MEGA2560 complete starter kit with more than 200pcs components, premium quality for Arduino kit

100% compatible with Arduino and most shields designed for the Arduino

Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player!

Multi-tool Device for Geeks

gen4 3.5" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

gen4 7.0" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

The GPS Module can detect your Tessel's global position! It features up to 1.8m accuracy, 66 search channels, 22 tracking channels, -165d...